{"title":"AL4\/DPO","description":"","products":[{"product_id":"c8c-029130","title":"AL4 [98-UP] Automatic Transmission Bushing Kit Torque Converter Brand Tc","description":"\u003cp\u003eWhen a torque converter rebuild on an AL4 DPO automatic transmission stalls because one bushing is missing or worn, this single-piece listing gives the technician exactly that component without having to source a full kit. What separates this item from a generic bushing is its placement in the torque converter remanufactured line of the AL4 DPO catalog, meaning it is cataloged and pulled for TC reman work specifically, not for a clutch pack or pump overhaul.\u003c\/p\u003e\u003cp\u003eREMCO has been working in automatic transmission parts since 1991, and every item that leaves the facility is checked against its parts record before it ships. This bushing is no different: it goes out with a contents label on the box so the technician can verify the piece without guessing.\u003c\/p\u003e\u003cp\u003eCoverage starts in 1998 and runs to current production on AL4 DPO units. At 1 lb, it is a compact shipment, but the part needs to be the right one for the right position in the converter, so confirm the unit code before placing the order. If your rebuild also needs friction material, steels, seals, or an Automatic Transmission Filter, those are separate listings. This listing is one bushing, nothing more, and it is built for the technician who knows exactly what position needs replacing and does not want to buy components that are already good on the bench.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOne dedicated bushing keeps the AL4 DPO torque converter rebuild on track, covering units from 1998 forward with a single focused component.\u003c\/li\u003e\n\u003cli\u003eThis listing contains one bushing only. It does not include friction discs, steel plates, seals, gaskets, Automatic Transmission Filters, or bands. Verify your full parts list before ordering.\u003c\/li\u003e\n\u003cli\u003eThis bushing belongs to the torque converter remanufactured line, meaning it is selected specifically for TC reman work on AL4 DPO units, not general overhaul use.\u003c\/li\u003e\n\u003cli\u003eExact contents: 1 bushing. Weight: 1 lb. The part ships with a contents label so you can confirm what is inside before you open it for the bench.\u003c\/li\u003e\n\u003cli\u003eBefore ordering, confirm the transmission code on the unit matches AL4 or DPO and that your rebuild requires this specific torque converter bushing position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Torque Converter, Brand Tc Reman\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40329423159476,"sku":"C8C-029130","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/PVA-74970K-P_454e4939-787c-4146-b969-9ae4c5ee46ae.jpg?v=1761753133"},{"product_id":"c8c-029630","title":"RE4F03A [98-06] DPO Automatic Transmission Bushing Kit","description":"\u003cp\u003eWhen the bushings and washers in a JR403E are worn, shaft play increases and internal components begin to contact surfaces they should never touch, leading to accelerated damage through the entire assembly. This set addresses that specific problem: it covers the bushing and washer positions for the JR403E automatic transmission, cataloged under the DPO model designation, and nothing else is bundled in to inflate the count or the price.\u003c\/p\u003e\u003cp\u003eThe JR403E is a unit that shows up across a range of applications built between 1989 and 1998, and the internal dimensions it requires are not interchangeable with other families. A bushing cut to the wrong bore or a washer of the wrong thickness will not hold end play through heat cycles and load, which is why this set is built around the geometry of this specific unit rather than pulled from a common bin.\u003c\/p\u003e\u003cp\u003eAt REMCO, kits and individual component sets like this one are assembled in-house, piece by piece, since 1991. Nothing arrives pre-packaged from a supplier and dropped into a box. The person packing the order checks what goes in against the part list, and that same list ships inside the box so the technician on the bench can verify the count before the case is opened on the vehicle.\u003c\/p\u003e\u003cp\u003eThe set weighs 1 lb and is documented under SKU. It does not include friction discs, steels, bands, an Automatic Transmission Filter, or any sealing components. If your rebuild calls for those items, they need to be sourced separately. Before placing the order, pull the transmission code directly from the unit and confirm it reads JR403E, then cross the model year against the 1989 to 1998 range. The catalog code on the case is the only reliable way to confirm fitment; external vehicle information alone is not enough.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRestores proper shaft and drum alignment in JR403E units, preventing premature wear from loose or degraded bushings and washers.\u003c\/li\u003e\n\u003cli\u003eThis listing does NOT include friction discs, steel plates, Automatic Transmission Filter, bands, or gaskets. Verify what your rebuild needs before ordering to avoid a return.\u003c\/li\u003e\n\u003cli\u003eSized specifically for JR403E automatic transmission geometry: the bushing and washer dimensions match the stock clearances for this unit, not a generic set.\u003c\/li\u003e\n\u003cli\u003eContents: one bushing and washer set, DPO catalog model, net weight 1 lb. Each piece is counted and verified against the part list included in the box.\u003c\/li\u003e\n\u003cli\u003eBefore ordering, confirm the transmission code on your unit matches JR403E and that the model year falls within 1989 to 1998. Fitment depends on the unit code, not the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Bushing Kit, DPO\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40329423257780,"sku":"C8C-029630","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/remco_a5d5bcf9-2b5b-43e0-86c0-f2661b5a78ab.jpg?v=1761753138"},{"product_id":"cbd-003705","title":"DPO [98-06] Automatic Transmission Rear Band Rigid (Relined)","description":"\u003cp\u003eWhen the friction band in a DPO automatic transmission is worn, glazed, or damaged, holding capacity drops and shift feel suffers. This listing is for a single replacement band built to the dimensional specifications of the DPO unit, giving the technician the one piece needed to address that failure point directly without purchasing components that are not required.\u003c\/p\u003e\u003cp\u003eREMCO has worked with automatic transmission parts since 1991, and every piece that ships from here is pulled individually, checked against the part list, and packed with that list inside the box so the receiving technician can confirm what arrived. This is not a prepackaged item pulled off a shelf somewhere else.\u003c\/p\u003e\u003cp\u003eThe band is the only item in this order. There are no seals, no gaskets, no Automatic Transmission Filter, no friction discs, and no steel plates included. If your rebuild calls for those components, they need to be sourced separately. That distinction matters before the order is placed, not after the box arrives.\u003c\/p\u003e\u003cp\u003eWeight of the item is 1 lb. The part number for this listing is, cataloged under the DPO application. Before placing the order, verify the transmission identification code on the actual unit reads DPO. Engineering revisions on the case and production date ranges can affect which band dimension is correct, so cross-referencing that information against the unit in hand is the right step before committing to this part.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOne band designed to address slipping or worn friction contact in DPO automatic transmission units, restoring proper holding force in the affected clutch circuit.\u003c\/li\u003e\n\u003cli\u003eThis listing covers a single band only. It does not include seals, gaskets, solenoids, Automatic Transmission Filter, steels, or clutch discs. Review your rebuild parts list before ordering to avoid a return trip.\u003c\/li\u003e\n\u003cli\u003eThe DPO band is a direct-fit replacement piece for the specific friction surface geometry of this unit. No adapting or trimming required for correct installation in a DPO case.\u003c\/li\u003e\n\u003cli\u003eContents: one (1) transmission band. Item weight: 1 lb. REMCO picks and inspects each piece individually before packing and includes a part list inside the box for verification.\u003c\/li\u003e\n\u003cli\u003eBefore ordering, confirm the transmission code on the unit matches DPO. Check the model year and any engineering revision codes on the case to ensure this is the correct band for your application.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Band, DPO Rigid\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40329435087028,"sku":"CBD-003705.","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/CBD-003705_c1d899bf-b859-47f5-ba31-9cdbc19246b4.jpg?v=1761753410"},{"product_id":"oc-35534","title":"DPO [98-06] Automatic Transmission Cooler","description":"\u003cp\u003eGetting fluid temperature under control is the core job of this oil cooler, and this unit is selected specifically for the DPO and AL4 automatic transmission family, covering production from 1990 to present. Unlike kit listings where you receive a collection of parts, this is a single component order: one cooler, 3 lb shipping weight, nothing else in the box.\u003c\/p\u003e\u003cp\u003eThe DPO and AL4 are the same automatic transmission unit known under two different designations, and the cooler in this listing is matched to that specific platform. If your transmission is running hot or the existing cooler is damaged, leaking, or restricted, this is the direct replacement part for that circuit. No adapters, no modifications implied.\u003c\/p\u003e\u003cp\u003eBecause this is not a kit, there are no seals, lines, gaskets, clamps, or fittings included. The technician sourcing this part is expected to already have or separately source any auxiliary hardware needed for installation. REMCO has been working in automatic transmission parts since 1991, and every item that ships from this operation is checked against its listing before it leaves. What the listing says is what ships.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm the transmission code on the unit you are servicing. The designations DPO and AL4 refer to the same gearbox, but always verify the specific application year falls within the 1990 to present range and that your assembly matches. If there is any uncertainty about fitment, pull the transmission code directly from the unit rather than relying on the vehicle model year alone.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRestores proper fluid temperature control in DPO and AL4 automatic transmissions, addressing overheating conditions that accelerate wear on internal components.\u003c\/li\u003e\n\u003cli\u003eThis listing covers the oil cooler only. It does not include any seals, gaskets, lines, fittings, or auxiliary hardware. Review your full parts list before ordering to avoid missing components.\u003c\/li\u003e\n\u003cli\u003eA single dedicated cooler sized and built for the DPO AL4 unit, not a universal part adapted to fit: the geometry and connection points match the stock transmission cooler circuit directly.\u003c\/li\u003e\n\u003cli\u003eOne oil cooler, shipping weight 3 lb. No additional pieces are included. Confirm this count matches what your repair requires before placing your order.\u003c\/li\u003e\n\u003cli\u003eBefore ordering, verify the transmission code on your unit matches DPO or AL4. Application range covers 1990 to present, but always cross-check the specific model year and assembly before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Cooler, DPO\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40329524805812,"sku":"OC-35534","price":116.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/Q_a51f286f-625b-48c1-8728-9ce9c3539391.png?v=1761757056"},{"product_id":"pk-29188c","title":"DPO [98-06] Automatic Transmission Piston Kit Bonded","description":"\u003cp\u003eApply pressure that reads correct at the port can still be lost at the piston.\u003c\/p\u003e\u003cp\u003eDPO bonded piston kit. This piston set restores a positive seal so the pack applies with full pressure behind it.\u003c\/p\u003e\u003cp\u003eReturn spring condition is part of the same circuit as the piston. The pistons are bonded rather than lip sealed. Shipping weight is 2 lb.\u003c\/p\u003e\u003cp\u003eThe parts list below is exactly what ships. Compare it against your teardown before ordering.\u003c\/p\u003e\u003cp\u003eREMCO has supplied automatic transmission parts since 1991, and every order ships with its part listing so the receiving technician can check what arrived against what was ordered.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTransmission Piston Kit for DPO - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper clutch apply pressure, stroke and sealing during piston and seal work\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one transmission piston kit as described, supplied loose for piston and seal work\u003c\/li\u003e\n\u003cli\u003eBonded rubber lip seals on a steel or aluminum piston body - designed for dependable service in the intended application. Ships at 2.00 lb, 18x16x5 in\u003c\/li\u003e\n\u003cli\u003eIntended for builders correcting apply pressure loss. Lubricate the lip seals before assembly and seat the piston square in the bore\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Piston Kit, DPO Bonded\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40329531719860,"sku":"PK-29188C","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/Q_aeed64e4-4113-4d19-82fa-723937873314.png?v=1761757778"},{"product_id":"pso-d112954","title":"DPO [98-06] Automatic Transmission Solenoid EPC Lu","description":"\u003cp\u003eA solenoid that sticks intermittently throws a code the customer never reproduces for the shop.\u003c\/p\u003e\u003cp\u003eDPO solenoid epc lu. This electrical component restores the control function the valve body depends on.\u003c\/p\u003e\u003cp\u003eResistance and response time are what the control module was calibrated against. Shipping weight is 1 lb.\u003c\/p\u003e\u003cp\u003eThe parts list below is exactly what ships. Compare it against your teardown before ordering.\u003c\/p\u003e\u003cp\u003eREMCO has supplied automatic transmission parts since 1991, and every order ships with its part listing so the receiving technician can check what arrived against what was ordered.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTransmission Solenoid for DPO - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper hydraulic control, shift timing and pressure regulation during control circuit repair\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one transmission solenoid as described, supplied loose for control circuit repair\u003c\/li\u003e\n\u003cli\u003eSolenoid winding and valve assembly matched to the stock resistance - designed for dependable service in the intended application. Ships at 1.00 lb, 18x16x5 in\u003c\/li\u003e\n\u003cli\u003eIntended for technicians diagnosing shift faults. Check resistance against the service manual value before install and route the harness clear of moving parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Solenoid, DPO EPC Lu\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40329558327476,"sku":"PSO-D112954","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/112954_1d3d4865-cf5e-4e99-9b3b-87a70979a51b.jpg?v=1761758888"},{"product_id":"tec-b33010","title":"DPO [98-06] Automatic Transmission Pan Gasket Platina Bottom Bonded Rubber","description":"\u003cp\u003eSeals do not usually tear; they take a set, and a set seal leaks at exactly the pressure the circuit needs most.\u003c\/p\u003e\u003cp\u003eDPO Platina Bottom pan Bonded Rubber pan Gasket. This set restores the containment the hydraulic circuits were designed with.\u003c\/p\u003e\u003cp\u003eInternal seals decide pressure; external seals decide what the customer sees. The pistons are bonded rather than lip sealed. Shipping weight is 1 lb.\u003c\/p\u003e\u003cp\u003eThe parts list below is exactly what ships. Compare it against your teardown before ordering.\u003c\/p\u003e\u003cp\u003eREMCO has supplied automatic transmission parts since 1991, and every order ships with its part listing so the receiving technician can check what arrived against what was ordered.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTransmission Gasket for DPO - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper case sealing, port isolation and fluid retention during a reseal\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one transmission gasket as described, supplied loose for a reseal\u003c\/li\u003e\n\u003cli\u003eGasket material cut to the stock bolt pattern and port layout - designed for dependable service in the intended application. Ships at 1.00 lb, 15x10x1 in\u003c\/li\u003e\n\u003cli\u003eIntended for shops resealing the unit. Clean both surfaces to bare metal and torque in sequence to the service manual figure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Pan Gasket, DPO Platina Bottom Pan Bonded Rubber\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40329655910580,"sku":"TEC-B33010","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/q_6e6286f8-4ab7-4251-afd1-b37a4eb1bd90.png?v=1761762785"},{"product_id":"ted-002425","title":"DPO [98-06] Automatic Transmission Overhaul Kit w\/ Gaskets Seals","description":"\u003cp\u003eDPO Overhaul Kit for AL4 automatic transmissions, 1998 to 2006. Includes gasket and seal set for a complete overhaul. 1 pieces in 1 components.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOverhaul Kit for DPO - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper case sealing, fluid retention and gasket seating during an overhaul service\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one overhaul kit as described, supplied loose for an overhaul service\u003c\/li\u003e\n\u003cli\u003eGasket and seal construction sized to the stock ports - designed for dependable service in the intended application. Ships at 1.00 lb, 18x16x5 in\u003c\/li\u003e\n\u003cli\u003eIntended for shops performing a teardown and reseal. Clean both surfaces to bare metal and torque the pan bolts in sequence to the service manual figure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Overhaul Gasket Kit\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40329678028980,"sku":"TED-002425","price":143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/2425_ef2aef12-109c-428a-9c87-c0f4d57950c1.jpg?v=1761763373"},{"product_id":"ted-002654","title":"DPO [98-06] Automatic Transmission Overhaul Kit w\/ Gaskets Seals","description":"\u003cp\u003eDPO Overhaul Kit for AL4 automatic transmissions, 1998 to 2006. Includes gasket and seal set for a complete overhaul. 1 pieces in 1 components.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOverhaul Kit for DPO - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper case sealing, fluid retention and gasket seating during an overhaul service\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one overhaul kit as described, supplied loose for an overhaul service\u003c\/li\u003e\n\u003cli\u003eGasket and seal construction sized to the stock ports - designed for dependable service in the intended application. Ships at 1.93 lb, 18x16x5 in\u003c\/li\u003e\n\u003cli\u003eIntended for shops performing a teardown and reseal. Clean both surfaces to bare metal and torque the pan bolts in sequence to the service manual figure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Overhaul Gasket Kit, WITH PISTONS\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40329701949620,"sku":"TED-002654","price":247.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/2654_3c463a0e-e44d-4ee1-8435-cea940e91cf5.jpg?v=1761763750"},{"product_id":"tev-015510","title":"DPO [98-06] Automatic Transmission Seal Pump Late Cut","description":"\u003cp\u003eOld sealing material gets brittle in storage as well as in service, which is why age matters as much as mileage.\u003c\/p\u003e\u003cp\u003eDPO pump late cut seal. This set returns every sealing point a teardown opens to a new sealing surface.\u003c\/p\u003e\u003cp\u003eEvery opened sealing point is a potential leak until it is replaced. Shipping weight is 1 lb.\u003c\/p\u003e\u003cp\u003eThe parts list below is exactly what ships. Compare it against your teardown before ordering.\u003c\/p\u003e\u003cp\u003eREMCO has supplied automatic transmission parts since 1991, and every order ships with its part listing so the receiving technician can check what arrived against what was ordered.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTransmission Gasket for DPO - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper case sealing, port isolation and fluid retention during a reseal\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one transmission gasket as described, supplied loose for a reseal\u003c\/li\u003e\n\u003cli\u003eGasket material cut to the stock bolt pattern and port layout - designed for dependable service in the intended application. Ships at 1.00 lb, 18x16x5 in\u003c\/li\u003e\n\u003cli\u003eIntended for shops resealing the unit. Clean both surfaces to bare metal and torque in sequence to the service manual figure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Pump, DPO Late Cut Seal\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40329731539124,"sku":"TEV-015510","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/15510_9c97f07b-2a10-49a8-a296-f563d3a626c2.jpg?v=1761764694"},{"product_id":"cfi-005721","title":"DPO [98-06] Automatic Transmission Filter","description":"\u003cp\u003eWhen fluid circulation inside the automatic transmission is restricted, shift behavior suffers before any other symptom appears, and replacing the Automatic Transmission Filter at the right service interval is the straightforward fix. This is a single Automatic Transmission Filter unit for the DPO AL4 automatic transmission, covering applications from 1998 through current production, nothing more and nothing less than what that service call requires.\u003c\/p\u003e\u003cp\u003eThe part number is and it belongs to the B2-Automatic Transmission Filters line. Shipped weight is 1 lb. There are no gaskets, no pan hardware, no solenoids, and no additional components packaged with it. If your service order calls for those items, they need to be sourced separately before the job starts.\u003c\/p\u003e\u003cp\u003eREMCO has worked in automatic transmissions since 1991. Each unit that leaves the facility is checked against its part record before it goes out, so the Automatic Transmission Filter you receive corresponds to the listing you ordered. The part number and application are logged, not assumed.\u003c\/p\u003e\u003cp\u003eBefore placing the order, pull the transmission code directly from the unit and confirm it reads DPO or AL4. Also verify that the build date falls at 1998 or later. The code on the vehicle documentation does not always match what is physically installed, especially on units that have been replaced in service, so checking the unit itself avoids a mismatch. If both points check out, this Automatic Transmission Filter fits the application.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eA clean fluid path keeps shift cycles consistent and extends service intervals; this Automatic Transmission Filter is the first line of defense when fluid flow is restricted or sluggish.\u003c\/li\u003e\n\u003cli\u003eThis listing covers the Automatic Transmission Filter only. No solenoids, gaskets, pan, or hardware are included. Verify what your service needs before ordering to avoid a return trip.\u003c\/li\u003e\n\u003cli\u003eThe DPO AL4 Automatic Transmission Filter is sourced and handled as a single unit, logged against its part record before it ships, so you receive exactly what the listing describes.\u003c\/li\u003e\n\u003cli\u003eOne Automatic Transmission Filter unit, 1 lb shipped weight. No additional components. Part number corresponds to the DPO AL4 application starting model year 1998 and running through current production.\u003c\/li\u003e\n\u003cli\u003eBefore ordering, confirm the transmission code stamped on the unit matches DPO or AL4 and that the build date falls within the 1998-and-later range.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Automatic Transmission Filter, DPO\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40335164735668,"sku":"CFI-005721","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/CFI-005721_b89cfab5-32a1-443e-a56b-6f4d7a2d4090.jpg?v=1761754782"},{"product_id":"pk-k90900h-99","title":"DPO [98-06] Automatic Transmission Piston Kit Bonded Bonded Pistons","description":"\u003cp\u003eThe piston is what converts line pressure into clamping force, so a leaking one makes every other repair pointless.\u003c\/p\u003e\u003cp\u003eDPO bonded piston kit bonded pistons. The set covers the apply positions a rebuild opens.\u003c\/p\u003e\u003cp\u003eSeal orientation determines whether the piston holds pressure or vents it. The pistons are bonded rather than lip sealed. Shipping weight is 2.71 lb.\u003c\/p\u003e\u003cp\u003eThe parts list below is exactly what ships. Compare it against your teardown before ordering.\u003c\/p\u003e\u003cp\u003eREMCO has supplied automatic transmission parts since 1991, and every order ships with its part listing so the receiving technician can check what arrived against what was ordered.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTransmission Piston Kit for DPO - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper clutch apply pressure, stroke and sealing during piston and seal work\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one transmission piston kit as described, supplied loose for piston and seal work\u003c\/li\u003e\n\u003cli\u003eBonded rubber lip seals on a steel or aluminum piston body - designed for dependable service in the intended application. Ships at 2.71 lb, 18x16x5 in\u003c\/li\u003e\n\u003cli\u003eIntended for builders correcting apply pressure loss. Lubricate the lip seals before assembly and seat the piston square in the bore\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Piston Kit, DPO Bonded\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40335244722356,"sku":"PK-K90900H-99","price":186.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/90900H_e145be87-f702-4fe3-af0f-f82a762730e8.jpg?v=1761758113"},{"product_id":"pso-050220","title":"DPO [98-06] Automatic Transmission Solenoid Shift","description":"\u003cp\u003eElectrical failures in the valve body mimic mechanical wear, which is how good clutches get replaced for nothing.\u003c\/p\u003e\u003cp\u003eDPO solenoid shift. Response time and resistance match the stock, which keeps the shift overlap correct.\u003c\/p\u003e\u003cp\u003eThe control strategy assumes a specific flow rate through the valve. Shipping weight is 1 lb.\u003c\/p\u003e\u003cp\u003eThe parts list below is exactly what ships. Compare it against your teardown before ordering.\u003c\/p\u003e\u003cp\u003eREMCO has supplied automatic transmission parts since 1991, and every order ships with its part listing so the receiving technician can check what arrived against what was ordered.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTransmission Solenoid for DPO - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper hydraulic control, shift timing and pressure regulation during control circuit repair\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one transmission solenoid as described, supplied loose for control circuit repair\u003c\/li\u003e\n\u003cli\u003eSolenoid winding and valve assembly matched to the stock resistance - designed for dependable service in the intended application. Ships at 1.00 lb, 18x16x5 in\u003c\/li\u003e\n\u003cli\u003eIntended for technicians diagnosing shift faults. Check resistance against the service manual value before install and route the harness clear of moving parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Solenoid, DPO Shift\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40335255011508,"sku":"PSO-050220","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/Q_8e65c20b-3cd6-4f0b-9a69-27b7de228e54.png?v=1761758206"},{"product_id":"pso-15501a","title":"DPO [98-06] Automatic Transmission Sensor Pressure","description":"\u003cp\u003eWhen the controller commands a shift and nothing happens, the circuit is usually the culprit, not the clutch.\u003c\/p\u003e\u003cp\u003eDPO pressure sensor. This component restores the commanded response the valve body needs.\u003c\/p\u003e\u003cp\u003eDirty fluid takes out solenoids before it takes out clutches. Shipping weight is 1 lb.\u003c\/p\u003e\u003cp\u003eThe parts list below is exactly what ships. Compare it against your teardown before ordering.\u003c\/p\u003e\u003cp\u003eREMCO has supplied automatic transmission parts since 1991, and every order ships with its part listing so the receiving technician can check what arrived against what was ordered.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTransmission Solenoid for DPO - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper hydraulic control, shift timing and pressure regulation during control circuit repair\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one transmission solenoid as described, supplied loose for control circuit repair\u003c\/li\u003e\n\u003cli\u003eSolenoid winding and valve assembly matched to the stock resistance - designed for dependable service in the intended application. Ships at 1.00 lb, 18x16x5 in\u003c\/li\u003e\n\u003cli\u003eIntended for technicians diagnosing shift faults. Check resistance against the service manual value before install and route the harness clear of moving parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Sensor, DPO Pressure\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40335284437172,"sku":"PSO-15501A","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/Q_eb6894fc-e132-46b7-a6a7-e02bf5bac7d5.png?v=1761758458"},{"product_id":"pso-252927","title":"DPO [98-06] Automatic Transmission Switch Neutral Tr","description":"\u003cp\u003eAn electrical fault in the shift circuit shows up as a stored code, a harsh shift or a gear the unit will not select.\u003c\/p\u003e\u003cp\u003eDPO neutral switch tr. This replacement returns the circuit to the response time the shift schedule was written around.\u003c\/p\u003e\u003cp\u003eOperating temperature changes resistance, which is why symptoms come and go. Shipping weight is 1 lb.\u003c\/p\u003e\u003cp\u003eThe parts list below is exactly what ships. Compare it against your teardown before ordering.\u003c\/p\u003e\u003cp\u003eREMCO has supplied automatic transmission parts since 1991, and every order ships with its part listing so the receiving technician can check what arrived against what was ordered.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTransmission Solenoid for DPO - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper hydraulic control, shift timing and pressure regulation during control circuit repair\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one transmission solenoid as described, supplied loose for control circuit repair\u003c\/li\u003e\n\u003cli\u003eSolenoid winding and valve assembly matched to the stock resistance - designed for dependable service in the intended application. Ships at 1.00 lb, 18x16x5 in\u003c\/li\u003e\n\u003cli\u003eIntended for technicians diagnosing shift faults. Check resistance against the service manual value before install and route the harness clear of moving parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x DPO Neutral Switch Tr\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40335286075572,"sku":"PSO-252927","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/PSO-252927_0bb5b344-5153-48ef-b169-1a545e8ff394.jpg?v=1761758485"},{"product_id":"trv-029204","title":"DPO [98-06] Automatic Transmission Metal Clad Seal Axle Seal Left (Outer)","description":"\u003cp\u003eThe outer shell of a seal rusts in its bore and walks out under pressure long before the lip fails.\u003c\/p\u003e\u003cp\u003eDPO axle seal left (outer) metal clad seal. This returns the sealing point to its stock containment.\u003c\/p\u003e\u003cp\u003eShaft runout shortens seal life regardless of seal build. Shipping weight is 1 lb.\u003c\/p\u003e\u003cp\u003eThe parts list below is exactly what ships. Compare it against your teardown before ordering.\u003c\/p\u003e\u003cp\u003eREMCO has supplied automatic transmission parts since 1991, and every order ships with its part listing so the receiving technician can check what arrived against what was ordered.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMetal Clad Seal for DPO - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper shaft sealing, fluid retention and debris exclusion during a sealing repair\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one metal clad seal as described, supplied loose for a sealing repair\u003c\/li\u003e\n\u003cli\u003eSteel outer shell with a bonded sealing lip and garter spring - designed for dependable service in the intended application. Ships at 1.00 lb, 7x7x2 in\u003c\/li\u003e\n\u003cli\u003eIntended for shops chasing external leaks. Drive the seal square with the correct installer and lubricate the lip before install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Seal, DPO Axle Left [Outer] Metal Clad\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40335414526132,"sku":"TRV-029204","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/TRV-029204_1dcaa002-6067-4e5f-a40a-24f82d3f5604.jpg?v=1761765284"},{"product_id":"trv-029205","title":"AL4 [98-UP] Automatic Transmission Metal Clad Seal Remco 29205 6053 Boxed","description":"\u003cp\u003eReplacing a shaft seal costs minutes on the bench and hours once the unit is in the vehicle.\u003c\/p\u003e\u003cp\u003eAL4 Nonsparking Polypropylene Brush Metal Clad Seal. The seal is produced to the bore and shaft it serves.\u003c\/p\u003e\u003cp\u003eLip direction determines whether the seal holds or vents. Shipping weight is 1 lb.\u003c\/p\u003e\u003cp\u003eThe parts list below is exactly what ships. Compare it against your teardown before ordering.\u003c\/p\u003e\u003cp\u003eREMCO has supplied automatic transmission parts since 1991, and every order ships with its part listing so the receiving technician can check what arrived against what was ordered.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMetal Clad Seal for AL4 - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper shaft sealing, fluid retention and debris exclusion during a sealing repair\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one metal clad seal as described, supplied loose for a sealing repair\u003c\/li\u003e\n\u003cli\u003eSteel outer shell with a bonded sealing lip and garter spring - designed for dependable service in the intended application. Ships at 1.00 lb, 7x7x2 in\u003c\/li\u003e\n\u003cli\u003eIntended for shops chasing external leaks. Drive the seal square with the correct installer and lubricate the lip before install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Seal, REMCO 29205 6053 BOXED Nonsparking Polypropylene Brush Metal Clad\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40335414558900,"sku":"TRV-029205","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/TRV-029205_449a4bee-ec46-421d-94e6-c4edc741e50f.jpg?v=1761765288"},{"product_id":"trv-029206","title":"DPO [98-06] Automatic Transmission Metal Clad Seal Torque Converter metal","description":"\u003cp\u003eFor DPO automatic transmissions. Leaks at the axle and output shafts are the ones customers see, and the ones that bring the vehicle back.\u003c\/p\u003e\u003cp\u003eAL4 CONVERTERMETAL CLAD SEAL. This seal restores containment at the shaft it rides on.\u003c\/p\u003e\u003cp\u003eA grooved shaft surface defeats any new seal installed on it. Shipping weight is 1 lb.\u003c\/p\u003e\u003cp\u003eThe parts list below is exactly what ships. Compare it against your teardown before ordering.\u003c\/p\u003e\u003cp\u003eREMCO has supplied automatic transmission parts since 1991, and every order ships with its part listing so the receiving technician can check what arrived against what was ordered.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDPO automatic transmission: metal Clad Seal for AL4 - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper shaft sealing, fluid retention and debris exclusion during a sealing repair\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one metal clad seal as described, supplied loose for a sealing repair\u003c\/li\u003e\n\u003cli\u003eSteel outer shell with a bonded sealing lip and garter spring - designed for dependable service in the intended application. Ships at 1.00 lb, 7x7x2 in\u003c\/li\u003e\n\u003cli\u003eIntended for shops chasing external leaks. Drive the seal square with the correct installer and lubricate the lip before install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Torque Converter, DPOTORQUE CONVERTERMETAL CLAD SEAL\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40335414591668,"sku":"TRV-029206","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/TRV-029206_06fd6459-b417-44fe-81c7-98007b864e89.jpg?v=1761765292"},{"product_id":"adp-renlt02","title":"DPO [98-06] Automatic Transmission Friction Clutch Pack Module","description":"\u003cp\u003eWhen a rebuild on a DPO or AL4 automatic transmission comes down to a single worn friction module, ordering a full kit adds cost and parts you do not need. This listing covers exactly that position: one friction module, SKU, cataloged for DPO AL4 units from 1998 and up, weighing 3.34 lb.\u003c\/p\u003e\u003cp\u003eAt REMCO, individual components like this one are pulled and verified against a part list before the box is closed, the same process used for multi-piece kits. That means what ships matches what is listed, and the part list travels inside the box so the technician at the bench can confirm it on arrival.\u003c\/p\u003e\u003cp\u003eThis friction module is a standalone piece. The listing does not include clutch discs, separator plates, Automatic Transmission Filter, band, or any other rebuild hardware. If your job needs those components, they should be sourced separately. Trying to use this listing as a catch-all for a full rebuild will result in a shortage at the bench.\u003c\/p\u003e\u003cp\u003eThe DPO and AL4 share a close relationship in design, and this module is cataloged across that application range starting in 1998 with no defined end year. That said, transmission codes can vary by market, production run, and powertrain combination. Before placing the order, pull the code directly from the transmission housing and cross it against this application. Do not rely solely on the vehicle year or engine size to confirm fitment.\u003c\/p\u003e\u003cp\u003eREMCO has worked in automatic transmission parts since 1991, and single-piece orders like this one are handled with the same attention as a full rebuild kit. The part number, the application, and the physical check at packing are all part of the process.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits DPO and AL4 automatic transmission units from 1998 onward, covering the friction module position in the valve body or clutch pack area of the unit.\u003c\/li\u003e\n\u003cli\u003eThis listing is for a single friction module only. It does not include clutch discs, steels, Automatic Transmission Filter, bands, or any other rebuild components. Verify your parts list before ordering.\u003c\/li\u003e\n\u003cli\u003eA single well-matched friction module can determine whether a rebuild holds up under load or slips early. Getting the right part for the right position matters more than the size of the kit around it.\u003c\/li\u003e\n\u003cli\u003eOne friction module included. Assembled weight: 3.34 lb. Part number, cataloged under the DPO AL4 application.\u003c\/li\u003e\n\u003cli\u003eBefore ordering, confirm the transmission code on the unit itself, the model year, and the engine pairing. DPO and AL4 share application overlap but individual builds can differ.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Friction Clutch Pack, DPO Module\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40395300798644,"sku":"ADP-RENLT02.","price":107.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/X_101ce659-d9c9-46e4-b08f-587de8deccc6.png?v=1767822631"},{"product_id":"c8c-k112901","title":"DPO [98-06] Automatic Transmission Bushing Kit","description":"\u003cp\u003eWhen the B-1-2 bushing and washer in a DPO or AL4 automatic transmission show wear, shaft movement increases and internal surfaces take on stress they were not designed to handle. This listing covers exactly that replacement point: one bushing and one washer for the B-1-2 circuit, nothing more, which makes it the right choice when a full kit is not what the job calls for.\u003c\/p\u003e\u003cp\u003eThe DPO and AL4 are the same automatic transmission unit sold under two names. The B-1-2 zone is a critical support area, and the bushing here controls how the shaft sits during rotation. A worn piece at this location does not always throw a code right away, but the mechanical effect builds with use. Replacing only the bushing and washer when that is what inspection shows is a precise approach that avoids unnecessary disassembly.\u003c\/p\u003e\u003cp\u003eAt REMCO, which has worked in automatic transmission parts since 1991, each order is built individually. This piece is pulled, checked against its item record, and packed with a parts list so the technician can confirm on arrival that what was ordered is what arrived. There are no preassembled packs sitting on a shelf.\u003c\/p\u003e\u003cp\u003eApplication covers DPO and AL4 units built from 1998 forward. Before placing the order, locate the transmission identification tag on the unit itself and confirm the code. Year of the vehicle alone is not always enough, since the same platform can carry more than one transmission depending on market or production date. Weight is 1 lb.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCorrect fit for the B-1-2 circuit in DPO and AL4 units keeps rotating parts running in their intended position without unwanted play.\u003c\/li\u003e\n\u003cli\u003eThis listing covers one bushing and one washer only. It does not include friction discs, steels, seals, Automatic Transmission Filter, or band. Review your parts list before ordering.\u003c\/li\u003e\n\u003cli\u003eA single worn bushing in the B-1-2 area can cause shaft movement that leads to internal damage over time. Replacing it as a unit-specific part addresses the source directly.\u003c\/li\u003e\n\u003cli\u003eContents: one B-1-2 bushing and one washer. Total weight 1 lb. REMCO selects and verifies each piece individually before it ships, and a parts list is included in the box.\u003c\/li\u003e\n\u003cli\u003eBefore ordering, confirm the transmission code on your unit matches DPO or AL4, and verify the build year falls within the 1998-and-up range covered here.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Bushing Kit, DPO\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":40395331338420,"sku":"C8C-K112901","price":127.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/Q_4be4a0fb-d737-40eb-a5c9-69cd407bd52d.png?v=1761753335"},{"product_id":"oc-324491","title":"DPO [98-06] Automatic Transmission Cooler OIL","description":"\u003cp\u003eWhen the oil cooler in an AL4 DPO automatic transmission fails, fluid temperature climbs and the entire unit pays the price downstream. This replacement oil cooler addresses that failure point directly, giving the transmission the thermal control it needs to keep fluid viscosity stable during operation.\u003c\/p\u003e\u003cp\u003eThis is a single cooler unit, not a kit. It weighs 3 lb and is sized for AL4 DPO applications from 2000 onward. There are no seals, no lines, no mounting hardware, and no gaskets packaged with it. A technician sourcing a complete set of parts for a full rebuild or cooler-circuit service will need to order those components separately. Knowing exactly what is and is not in the box before the job starts saves time on the bench.\u003c\/p\u003e\u003cp\u003eREMCO has worked with automatic transmission components since 1991, and every part that leaves the facility is checked against its order before it ships. That process applies here the same as it does to every kit on the shelf: the part you receive is the part on the label.\u003c\/p\u003e\u003cp\u003eBefore placing the order, confirm that the transmission code on the unit reads AL4 or DPO, and that the vehicle year falls within the 2000-and-newer range. These two checks take less than a minute and eliminate the most common reason a return gets initiated. If there is any doubt about the application, verify against the unit tag rather than the vehicle nameplate alone.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRestores proper fluid temperature regulation in AL4 DPO automatic transmission units, helping prevent heat-related wear on internal components.\u003c\/li\u003e\n\u003cli\u003eThis listing is for the oil cooler only. No gaskets, seals, lines, or hardware are included. Verify your full parts list before ordering to avoid incomplete repairs.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for AL4 DPO unit applications, this cooler matches the stock configuration so fitment does not require modification to the cooler circuit.\u003c\/li\u003e\n\u003cli\u003eSingle oil cooler unit. Shipping weight 3 lb. No additional components are bundled with this part.\u003c\/li\u003e\n\u003cli\u003eBefore ordering, confirm your transmission code matches AL4 or DPO and that your application falls within the 2000-and-newer range this part covers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Cooler, DPO OIL\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":44747541381366,"sku":"OC-324491","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/X_4eaa13f1-f4d4-48f9-b79a-1638998a7976.png?v=1761757035"},{"product_id":"pk-155240aa-stk","title":"DPO AL4 [97-UP] Automatic Transmission Piston Kit STK","description":"\u003cp\u003eThe piston is what converts line pressure into clamping force, so a leaking one makes every other repair pointless.\u003c\/p\u003e\u003cp\u003eDPO TRANSMISSION PISTON KIT STK. The sealing surface is produced to the bore it wipes.\u003c\/p\u003e\u003cp\u003eSeal orientation determines whether the piston holds pressure or vents it. Shipping weight is 3 lb.\u003c\/p\u003e\u003cp\u003eThe parts list below is exactly what ships. Compare it against your teardown before ordering.\u003c\/p\u003e\u003cp\u003eREMCO has supplied automatic transmission parts since 1991, and every order ships with its part listing so the receiving technician can check what arrived against what was ordered.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTransmission Piston Kit for DPO - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper clutch apply pressure, stroke and sealing during piston and seal work\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one transmission piston kit as described, supplied loose for piston and seal work\u003c\/li\u003e\n\u003cli\u003eBonded rubber lip seals on a steel or aluminum piston body - designed for dependable service in the intended application. Ships at 3.00 lb, 18x16x5 in\u003c\/li\u003e\n\u003cli\u003eIntended for builders correcting apply pressure loss. Lubricate the lip seals before assembly and seat the piston square in the bore\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Piston Kit, DPO AL4 STK\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":47689583001846,"sku":"PK-155240AA-STK","price":112.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/X_883c4366-68b3-429f-93f3-3e7f22fc6698.jpg?v=1761757746"},{"product_id":"rkdpo-pk","title":"DPO AL4 [97-UP] Automatic Transmission Rebuild Kit w\/ Pistons","description":"\u003cp\u003eDPO AL4 Rebuild Kit for AL4 automatic transmissions, 1997 and later. Includes pistons and gasket and seal set for a complete overhaul. 2 pieces in 2 components.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTransmission Rebuild Kit for DPO - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper friction engagement, piston stroke and case sealing during a full transmission rebuild\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one transmission rebuild kit as described, supplied loose for a full transmission rebuild\u003c\/li\u003e\n\u003cli\u003eSteel and friction plate construction with formed rubber seals - designed for dependable service in the intended application. Ships at 5.00 lb, 18x16x5 in\u003c\/li\u003e\n\u003cli\u003eIntended for rebuilders performing a complete overhaul. Soak the friction material in the specified fluid before assembly and set to the service manual range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 x Piston Kit, Bonded\u003c\/li\u003e\n\u003cli\u003e1 x Rebuild Kit, -full Overhaul With Clutches \u0026amp; Automatic Transmission Filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":49199179825398,"sku":"RKDPO-PK","price":490.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/RKDPO-PK_99a58a5c-cfb0-4604-b8b8-7a81cbdbd0bf.jpg?v=1761761303"},{"product_id":"oc-324490","title":"AL4 DPO [90-98] cooler","description":"\u003cp\u003eDPO DPO 1990-98 cooler\u003c\/p\u003e\u003cp\u003eautomatic transmission component designed to support proper operation, fit, and durability when installed according to specification.\u003c\/p\u003e\u003cp\u003eWHAT'S IN THE BOX:\u003c\/p\u003e\u003cp\u003e- DPO 1990-98 cooler (OC-324490)\u003c\/p\u003e\u003cp\u003eVehicle Compatibility:\u003c\/p\u003e\u003cp\u003e- CLiO [98-98] 1.4, 1.6, 2.0\u003c\/p\u003e\u003cp\u003e- Megane [98-98] 1.4, 1.5, 1.6, 1.9, 2.0\u003c\/p\u003e\u003cp\u003eEngines: 1.4L, 1.5L, 1.6L, 1.9L, 2.0L\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTransmission Cooler for DPO - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper heat transfer, fluid temperature control and flow during a cooling upgrade\u003c\/li\u003e\n\u003cli\u003ePackage Includes: one transmission cooler as described, supplied loose for a cooling upgrade\u003c\/li\u003e\n\u003cli\u003eStacked plate or tube and fin core with threaded fittings - designed for dependable service in the intended application. Ships at 3.00 lb, 18x16x5 in\u003c\/li\u003e\n\u003cli\u003eIntended for anyone reducing fluid temperature. Mount ahead of the condenser with clear airflow and support the lines so they cannot chafe\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":49199452127478,"sku":"OC-324490","price":86.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/OC-324490_8786107e-ab4a-4294-a514-28f476266447.jpg?v=1761757033"},{"product_id":"rkdpo","title":"AL4 DPO [98-UP] Automatic Transmission Rebuild Kit w\/ Frictions Overhaul","description":"\u003cp\u003eAL4 DPO Rebuild Kit for AL4 automatic transmissions, 1998 and later. Includes frictions, band, gasket and seal set and Automatic Transmission Filter for a complete overhaul. 5 pieces in 4 components.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTransmission Rebuild Kit for AL4 - replacement component designed for proper fit and function\u003c\/li\u003e\n\u003cli\u003eDesigned to support proper friction engagement, piston stroke and case sealing during a full transmission rebuild\u003c\/li\u003e\n\u003cli\u003ePackage Includes: friction plates, band, Automatic Transmission Filter and gasket and seal set. 5 pieces in 4 components\u003c\/li\u003e\n\u003cli\u003eSteel and friction plate construction with formed rubber seals - designed for dependable service in the intended application. Ships at 6.34 lb, 17.88x12.38x3 in\u003c\/li\u003e\n\u003cli\u003eIntended for rebuilders performing a complete overhaul. Soak the friction material in the specified fluid before assembly and set to the service manual range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 x Friction Clutch Pack, Module\u003c\/li\u003e\n\u003cli\u003e2 x Band, Rigid [Relined]\u003c\/li\u003e\n\u003cli\u003e1 x Overhaul Gasket Kit\u003c\/li\u003e\n\u003cli\u003e1 x Automatic Transmission Filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFits CLiO [98-06], Megane [98-06].\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remco","offers":[{"title":"Default Title","offer_id":49241300599030,"sku":"RKDPO","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0505\/1200\/3252\/files\/2425_7dd57743-510b-47f9-8ee0-b63d4478dcae.jpg?v=1762538010"}],"url":"https:\/\/remco-transmission-parts.com\/collections\/al4-dpo\/dpo-transmission-solenoid-automatic-transmission.oembed","provider":"REMCO TRANSMISSION PARTS","version":"1.0","type":"link"}