When the bushings and washers in a JR403E are worn, shaft play increases and internal components begin to contact surfaces they should never touch, leading to accelerated damage through the entire assembly. This set addresses that specific problem: it covers the bushing and washer positions for the JR403E automatic transmission, cataloged under the DPO model designation, and nothing else is bundled in to inflate the count or the price.
The JR403E is a unit that shows up across a range of applications built between 1989 and 1998, and the internal dimensions it requires are not interchangeable with other families. A bushing cut to the wrong bore or a washer of the wrong thickness will not hold end play through heat cycles and load, which is why this set is built around the geometry of this specific unit rather than pulled from a common bin.
At REMCO, kits and individual component sets like this one are assembled in-house, piece by piece, since 1991. Nothing arrives pre-packaged from a supplier and dropped into a box. The person packing the order checks what goes in against the part list, and that same list ships inside the box so the technician on the bench can verify the count before the case is opened on the vehicle.
The set weighs 1 lb and is documented under SKU. It does not include friction discs, steels, bands, an Automatic Transmission Filter, or any sealing components. If your rebuild calls for those items, they need to be sourced separately. Before placing the order, pull the transmission code directly from the unit and confirm it reads JR403E, then cross the model year against the 1989 to 1998 range. The catalog code on the case is the only reliable way to confirm fitment; external vehicle information alone is not enough.
- Restores proper shaft and drum alignment in JR403E units, preventing premature wear from loose or degraded bushings and washers.
- This listing does NOT include friction discs, steel plates, Automatic Transmission Filter, bands, or gaskets. Verify what your rebuild needs before ordering to avoid a return.
- Sized specifically for JR403E automatic transmission geometry: the bushing and washer dimensions match the stock clearances for this unit, not a generic set.
- Contents: one bushing and washer set, DPO catalog model, net weight 1 lb. Each piece is counted and verified against the part list included in the box.
- Before ordering, confirm the transmission code on your unit matches JR403E and that the model year falls within 1989 to 1998. Fitment depends on the unit code, not the vehicle.
What's in the box
- 1 x Bushing Kit, DPO
Compatible vehicles
- Fits CLiO [98-06], Megane [98-06].
| bushing kit dpo Automatic transmission |
Default Title |
|---|