When rebuilding a 6T30 or 6T35 automatic transmission, every steel in the clutch pack has to match the stock specification or end play and apply pressure will be off from the first shift. This MH9 steel module is a single replacement piece sourced and verified specifically for 6T30 and 6T35 units built from 2009 forward.
The MH9 code is not a generic designation. It refers to a defined thickness and spline profile within the 6T30 and 6T35 clutch pack architecture. Installing a steel that does not match that profile changes the stack height, throws off end play tolerances, and can cause the clutch to drag or slip even with new friction discs. If your disassembly shows a warped, heat-blued, or grooved MH9 steel, this is the piece to order.
What you receive is one steel module, weight 3.4 lb, picked and checked against the part record here at REMCO before it leaves. A parts list is packed in the box so you can confirm what you received matches what you ordered. REMCO has been working in automatic transmission parts since 1991 and every piece goes out individually verified.
This listing does not include friction discs, seals, gaskets, Automatic Transmission Filter, band, or any other component. If you are building a full clutch pack you will need to source those separately. Before placing the order, confirm your unit is coded 6T30 or 6T35 and measure your existing stack to make sure the MH9 is the steel you are missing.
- Direct replacement steel module keeps clutch pack geometry consistent and helps avoid slippage caused by a worn or warped reaction plate in 6T30 and 6T35 units.
- This listing covers the MH9 steel module only. It does not include friction discs, seals, gaskets, Automatic Transmission Filter, or any other transmission components. Verify what your rebuild requires before ordering.
- The MH9 designation identifies a specific steel thickness and spline profile engineered for the 6T30 and 6T35 apply circuit. Swapping in a non-matched steel risks incorrect end play and repeat failure.
- Single piece: one MH9 steel module, 3.4 lb. Pulled and verified against the part record at REMCO before it ships, and a parts list is included in the box.
- Before ordering, confirm your unit code is 6T30 or 6T35 and cross the MH9 designation against your disassembly measurements to make sure this steel matches your clutch pack stack-up.
What's in the box
- One steel plate, module MH9, for 6T30 and 6T35 transmissions
Compatible vehicles
- 6T30 / 6T35: L4 1.6L: Aveo (Non-USA)[13-16], Gentra (Non-USA)[13-17], Orlando (Non-USA)/Sonic (Non-USA)[13-18] · L4 1.8L: B-CUV (Non-USA)[12], Cruze[13-16], Sonic[13-18] · L4 1.4L: Aveo[09-12], Cruze[16-19] · L4 1.2/1.4/1.6/1.8L: Gentra (Non-USA)[11-12] · L4 1.4/1.5/1.6L: Lova (Non-USA)[09-12] · L4 1.4/1.6L: Viva (Non-USA)[11] · L4 1.6/1.8/2.0L: Cruze[09-13] · L4 1.6/1.8L: Sonic[12-13] · L4 2.0L: Orlando (Non-USA)[10-12]
- L4 1.3/1.4/1.6/1.8L: Gentra[11]
- Holden · L4 1.6L: Barina[13-17]
| 6t30 mh9 steel module Automatic transmission |
Default Title |
|---|