When the clutch stack in an AW55-series unit wears through the steel plates, replacing friction discs alone is not enough and leaving scored steels in place will destroy a fresh set of frictions in short order. This listing covers the steel plates set for AW55-50SN, AW55-51SN and RE5F22A automatic transmission units built from 2000 onward, giving the technician the metal components of the clutch pack without bundling in parts that may not need replacement on every job.
The set weighs 4.43 lb and is assembled at REMCO, where every plate is counted by hand before the box closes. A parts list is packed inside so the technician can cross-check what arrived against what was ordered, no assumptions required.
What this set does not include is equally important to understand before ordering: friction discs, seals, o-rings, gaskets, Automatic Transmission Filter, band or any soft component are sold separately. A shop pulling an AW55 apart for a full rebuild will likely need those items sourced from other listings. This set addresses only the steel side of the clutch stack.
REMCO has worked exclusively in automatic transmission parts since 1991, and the assembly process here is the same as it has always been: components sourced, counted, verified and packed one order at a time, not a prepackaged case pulled off a shelf.
Before purchasing, confirm the transmission identification code on the unit itself, the production year and any suffix on the model designation. AW55-50SN and AW55-51SN carry the same steel plate set in this catalog, and RE5F22A is also covered, but the technician should verify the build date falls within the 2000-and-up application range to avoid ordering for the wrong variant.
- Steel plates set covers the full clutch pack replacement need for AW55-50SN, AW55-51SN and RE5F22A units, giving you the metal side of the clutch stack in one order.
- This set does NOT include friction discs, seals, gaskets, Automatic Transmission Filter or any soft parts. If your job calls for those components, check separately before placing your order to avoid a return.
- Each set is assembled at REMCO by hand, counted against its parts list, and the list ships inside the box so you can verify every plate on arrival without guessing.
- Steel plates set weighing 4.43 lb, cataloged under AW55-50SN and covering AW55-51SN and RE5F22A applications, no additional hardware included.
- Before ordering, confirm the exact transmission code stamped on your unit and the model year of the vehicle it came out of. AW55 and RE5F22A share the same plates but always verify the build date matches the [00-UP] range.
What's in the box
- 1 x Steel Clutch Pack, AW55-50SN
Compatible vehicles
- Fits C30 [07-13], C70 [01-09], S80 [04-06].
| JUEGO DISCOS ACERO AW55-50SN 2000-UP Automatic transmission |
Default Title |
|---|