10R80 10R100 [16-35] Automatic Transmission Steel Clutch Pack

Reused steels are the most common reason a rebuild comes back on the hook within the first thousand miles.

10R80 Steel Clutch Pack. These steel plates are machined flat within specification so the clutch pack applies evenly across the full friction surface.

Reusing the stock steels after a burn up puts the new friction material against a glazed, uneven face and the repair does not last. Shipping weight is 8 lb.

The parts list below is exactly what ships. Compare it against your teardown before ordering.

REMCO has supplied automatic transmission parts since 1991, and every order ships with its part listing so the receiving technician can check what arrived against what was ordered.

• Steel Clutch Plate Module for 10R80 - replacement component designed for proper fit and function
• Designed to support proper heat transfer, clutch and plate stack height during clutch pack service
• Package Includes: one steel clutch plate module as described, supplied loose for clutch pack service
• Hardened steel plates matched to the stock stack thickness - designed for dependable service in the intended application. Ships at 10.35 lb, 16x15x2 in
• Intended for builders replacing scored or heat damaged plates. Deburr the drum splines, stack alternating with the frictions and set to the service manual range

What's in the box

• 1 x Steel Clutch Pack, 10R80 10R100

Compatible vehicles

• Fits Mustang [17-19], Endeavour (Non-USA) [18-19], Everest (Non-USA) [18-19], Expedition [18-19], F150 1/2 Ton - Pickup [17-19], F150 Raptor [16-19], Navigator [18-19].