When a rebuild calls for replacing just the steel in the 722.9 clutch pack, this single steel plate covers that need without forcing you to buy components you already have on the bench. What sets it apart from a kit purchase is straightforward: it is one part, correctly identified for the 722.9 application, available on its own so the rebuilder can source exactly what the job requires and nothing more.
The 722.9 is a complex automatic transmission with multiple clutch packs operating under high clamping loads. A steel plate that has warped, blued, or lost its surface finish disrupts clamp force distribution and can cause delayed engagement, shudder, or slippage in the affected clutch circuit. Swapping only the damaged steel, rather than replacing the entire pack, is a common approach when the friction discs still measure within spec.
This listing is for one steel clutch plate. It does not include friction discs, seals, o-rings, gaskets, Automatic Transmission Filter, band, or any other part. If your rebuild requires additional components for the 722.9, those must be sourced separately. Check your disassembly notes and measurements before ordering to confirm this is the piece you are short.
Before placing the order, confirm the unit code on your transmission case reads 722.9 and that the application is 2004 or later. The part weighs 5 lb. It is pulled individually and verified against its item record before shipping, the same process used on every piece that leaves the facility. REMCO has worked in automatic transmission parts since 1991, and single-piece availability for units like the 722.9 is part of how the operation is structured to support professional rebuilders.
- This steel clutch plate addresses worn or glazed steels in the 722.9 clutch pack, helping restore proper clutch engagement and preventing slippage caused by a damaged friction surface.
- This listing covers one steel plate only. It does not include friction discs, seals, gaskets, Automatic Transmission Filter, or any other components. Review your parts list before purchasing to avoid a return.
- The 722.9 is a multi-ratio automatic unit with closely stacked clutch packs where a single out-of-spec steel can affect shift feel across several ranges. Replacing it individually lets the rebuilder address exactly what failed.
- One steel clutch plate, 5 lb shipped. Pulled and checked against its part record before it leaves. No kit, no extras, just the steel.
- Verify the unit code stamped on your transmission is 722.9 and that the vehicle was built 2004 or later before ordering. Application starts at 2004 and runs to current production.
What's in the box
- 1 x Steel Clutch Pack, 722.9
Compatible vehicles
- Fits C230 [06-09], C250 [12-15], C280 [06-07], C300 [08-17], C350 [06-15], C400 [15], C450 AMG [15-16], C63 AMG [07-15], CL500 [05-06], CL550 [07-14], CL63 AMG [07-14], CLK350 [06-13].
| 722.9 STEEL CLUTCH PACK 04-UP |
Default Title |
|---|