When the clutch pack in a TH400 or 3L80 unit has worn past its service limit, this stage 1 red friction clutch pack gives the technician a direct replacement without the uncertainty of a mismatched part. What separates this piece from a generic friction is that it is catalogued specifically under TH400 and 3L80 coverage starting in 1970 and running through current production, so the application is defined, not assumed.
The friction material is the stage 1 red specification, which is the correct designation for these automatic transmission units under normal to moderate duty use. The part weighs 3 lb, which reflects the actual clutch pack assembly the technician will handle on the bench.
This is a single-piece listing. There are no steel reaction plates, no Automatic Transmission Filter, no seal set, and no gasket kit included. If your rebuild requires those components, they need to be sourced separately. Reading what a listing does not include saves a return shipment and a delay on the job.
At REMCO, parts are pulled and verified against the part record individually before they leave the building. That process has been in place since the company started working in automatic transmissions in 1991. The box that arrives includes the part identification so the technician can cross-reference on the bench before teardown begins.
Before placing the order, confirm two things: that the transmission you are working on is identified as a TH400 or 3L80, and that the unit was produced in 1970 or later. If there is any doubt about the transmission code, verify it against the unit tag or the vehicle build record before ordering.
- Drop-in replacement friction clutch pack restores clutch engagement and addresses slipping caused by worn or glazed friction material in TH400 and 3L80 units.
- This listing covers the friction clutch pack only. It does not include steel plates, an Automatic Transmission Filter, seals, gaskets, or any rebuild kit. Verify what your overhaul requires before ordering.
- The stage 1 red friction material is specific to TH400 and 3L80 automatic transmission applications covering 1970 and forward, giving you a defined fit without adapting a generic part.
- Single friction clutch pack, 3 lb. Assembled and checked against its part record at the REMCO facility before shipment, consistent with 30-plus years of transmission parts handling since 1991.
- Before ordering, confirm your transmission code is TH400 or 3L80 and that the unit falls within the 1970-and-forward production range. Mis-identification is the most common reason for returns.
What's in the box
- 1 x Clutch Pack, TH400 Stage 1 Red Performance
Compatible vehicles
- Fits K2500 Panel Delivery 3/4 Ton 4WD [67].
| clutch pack Raybestos stage 1 red clutches performance th400 Automatic transmission |
Default Title |
|---|