For A750E automatic transmissions. When a clutch pack starts slipping and the inspection points to one burnt or glazed friction plate, replacing the whole set is not always the job at hand. This listing covers a single friction clutch plate for the A750, A751E, and A751F automatic transmission family, built to the dimensions those units require and weighing in at 2.6 lb, which reflects the full friction material thickness these packs depend on to manage heat and engagement load over time.
The application range opens at 2003 and runs forward from there, so this plate covers a wide span of units still in active service. Because it is a single piece and not a kit, the technician pulling a clutch pack apart and finding one failed plate can source exactly what is needed without buying components already sitting on the bench.
What this listing does not include is worth stating plainly: no steel reaction plates, no seals, no gaskets, no Automatic Transmission Filter, no band. If the rebuild calls for any of those, they need to be ordered separately. Checking your parts breakdown before placing the order saves a delay once the transmission is already open on the bench.
The part number for this plate is. Before ordering, verify that the code on the actual transmission case reads A750, A751E, or A751F, and that the unit falls within the 2003-and-up production window. A mismatched plate in a clutch pack does not seat correctly and the problem comes right back. Confirming the code takes a minute and keeps the repair on track.
- A750E automatic transmission: a single friction clutch plate sized and rated for the A750, A751E, and A751F units covering 2003 and up builds, replacing a worn or glazed plate before slip or burnt fluid becomes the bigger problem.
- This listing is for one friction plate only. It does not include steel plates, seals, gaskets, Automatic Transmission Filter, band, or any other clutch pack component. Check your parts list before ordering to confirm this is the exact piece you need.
- At 2.6 lb this is a solid, full-weight friction plate, not a lightweight substitute. That mass reflects the friction material thickness needed to handle the heat cycles these clutch packs see in regular service.
- Contents: one A750 A751E A751F friction clutch plate, 2.6 lb. No additional components are packed with this unit. The part number is if you need to cross-reference against your rebuild sheet.
- Before ordering, confirm the exact transmission code stamped on your unit matches A750, A751E, or A751F, and verify the model year falls within the 2003-and-up application range. A wrong plate wastes a teardown.
What's in the box
- 1 x Friction Clutch Pack, A750E Module
Compatible vehicles
- Fits GX 470 [03-09], LX 470 [03-07], Grand Vitara [06-12], Vitara [06-08], XL-7 [04-07], 4Runner [03-15], FJ Cruiser [07-14], Land Cruiser [03-07], Sequoia [04-08], Tacoma [05-15], Tundra [05-14].
| a750e friction module Automatic transmission |
Default Title |
|---|
