62TE [07-UP] Rebuilt Solenoid Pack (Bolts To Valve Body)(23 Blade Connector)

When solenoid failure is behind the shift complaints on a 62TE unit, replacing the entire solenoid pack as an assembly is a direct path to restoring proper hydraulic control, and this remanufactured pack is built to bolt straight onto the valve body with no adapter or rewiring. What sets this part apart from a bare solenoid swap is the 23-blade connector, which aligns with the factory harness and removes the guesswork of matching individual terminals during reassembly.

This is a single-piece solenoid pack, not a kit. It does not come with friction discs, steel plates, a filter, gaskets, or any other overhaul components. If your job calls for those parts, they need to be sourced separately before the transmission goes back together.

Fitment is specific to the 62TE automatic transmission, covering units from 2007 through 2016. The pack mounts directly to the valve body using the original bolt locations, so no machining or bracket work is needed at installation. Connector count is 23 blades; if the unit in your shop has a different blade count, this is not the correct part.

At 4.1 lb, the pack ships as a single unit. Before placing the order, read the transmission code directly from the case or documentation for the vehicle being repaired, confirm the year range falls between 2007 and 2016, and verify the blade count on the existing harness connector. REMCO has been working in automatic transmission parts since 1991, and each unit that leaves the facility is checked against its part record before it ships.

• Restores proper shift control and pressure regulation in 62TE automatic transmission units from 2007 through 2016, addressing solenoid failure as a root cause of erratic or delayed shifts.
• This listing is a single solenoid pack only. It does not include any friction discs, steel plates, filter, gaskets, or sealing rings. Verify what else your repair requires before ordering.
• The solenoid pack is remanufactured and assembled to fit directly onto the valve body using the original bolt pattern, with a 23-blade connector that matches the factory harness without modification.
• Single remanufactured solenoid pack, 23-blade connector configuration, bolt-on fitment to valve body, shipping weight 4.1 lb. No additional solenoids or brackets are included.
• Before ordering, confirm the transmission code on the unit itself is 62TE and that the application falls within the 2007 to 2016 range. Connector blade count and bolt pattern must match your existing valve body.