A faulty solenoid pack in a 4R100 automatic transmission can cause erratic shifts, solenoid codes, and complete loss of electronic shift control, and this rebuilt PWM solenoid pack is the direct replacement to address that failure. What sets this part apart from a generic solenoid body is that it is specific to the 4R100 in its PWM configuration, covering units from 1998 and up, so the electrical and mechanical interface matches what the valve body expects.
This is a single rebuilt solenoid pack. It does not include gaskets, seals, clutch plates, steels, Automatic Transmission Filter, or any other transmission hardware. If your repair requires those components, they need to be sourced separately. The part ships at 3.6 lb and is cataloged in the E4OD reference line, which is the predecessor platform the 4R100 is derived from.
Before placing the order, confirm three things: that the transmission code on the unit is 4R100, that the solenoid body type is PWM, and that the build date falls within the 1998-and-up range. The 4R100 was produced in both earlier and PWM variants, and installing the wrong solenoid pack will not resolve the fault. A technician pulling the unit can verify the solenoid type from the connector configuration on the existing pack before ordering the replacement.
REMCO has been working in automatic transmission parts since 1991. This part is not a shelf-pulled prepack. It is inspected and verified against its catalog reference before it leaves the facility.
- Replaces a failed or erratic solenoid pack in 4R100 units, restoring shift control and preventing further electrical faults in the valve body.
- This listing is a single rebuilt solenoid pack only. It does not include clutch packs, steels, seals, gaskets, or any other transmission components. Verify this is the specific part you need before ordering.
- Built for PWM-type 4R100 units produced from 1998 onward, this solenoid pack is assembled as a rebuilt unit, not new old stock, and is checked before it ships.
- Single rebuilt solenoid pack, PWM configuration, compatible with 4R100 transmission. Cataloged under E4OD application reference. Shipping weight: 3.6 lb.
- Before ordering, confirm your transmission is a 4R100 with PWM solenoid configuration and that the unit falls within the 1998-and-up production range. Unit code and build date matter here.
What's in the box
- 1 x Solenoid, E4OD 4R100 Rebuilt Pack PWM Units
Compatible vehicles
- Fits E150 1/2 Ton Econoline - Van [89-95], E150 1/2 Ton Econoline Club Wagon [89-95], E250 3/4 Ton Econoline - Van [89-95], E350 1 Ton Econoline - Van [89-95], E350 1 Ton Econoline Club Wagon [89-95], F450 Super Duty 1 1/2 Ton Truck [90-95], Bronco [94-98], E & E350 Super Duty 1 Ton Econoline - Van [96-97], E250 3/4 Ton Econoline Club Wagon [89-91], Expedition [97-98], F Super Duty - Pickup [96-97], F150 1/2 Ton - Pickup [89-95].
| rebuilt solenoid pack e4od 4r100 pwm units 1998-up Automatic transmission |
Default Title |
|---|