68RFE [07-UP] Automatic Transmission Solenoid Rebuild Pack

Restoring reliable shift control in a 65RFE, 66RFE, or 68RFE automatic transmission often comes down to one component: the solenoid pack. This rebuilt solenoid pack is a direct replacement for the stock unit and addresses the hydraulic and electronic control failures that cause erratic shifts, delayed engagement, and stored transmission fault codes in these units built from 2009 forward.

Unlike a new aftermarket shell, a rebuilt solenoid pack has been disassembled, inspected, and reassembled to correct the specific wear patterns and electrical failures common to this generation of automatic transmission control. That distinction matters when the stock complaint is a unit that shifts unpredictably or throws codes that point to solenoid circuit performance.

This listing is for a single rebuilt solenoid pack weighing 5.05 lb. It does not include an Automatic Transmission Filter, gaskets, friction discs, steels, seals, or any other component. If your repair requires those parts, they need to be sourced separately. Read your parts requirement carefully before adding this to your order.

Application covers 65RFE, 66RFE, and 68RFE transmissions from 2009 and up. Before ordering, locate the transmission identification code on the unit itself and confirm it matches one of those three designations. The year range alone is not enough to confirm fitment because more than one transmission family may share a production window. A technician familiar with these units will find the code on the case or on the identification tag.

REMCO has worked in automatic transmissions since 1991. Each unit that leaves the facility is checked against its own parts record before it ships, and the box includes documentation of what is inside.

• A rebuilt solenoid pack addresses erratic shift behavior and transmission fault codes tied to solenoid circuit failure in 65RFE, 66RFE, and 68RFE units.
• This listing covers the solenoid pack only. No Automatic Transmission Filter, no gaskets, no friction discs, no steels, no seals are included. Verify your full parts list before ordering.
• A rebuilt unit restores proper hydraulic and electronic control to the valve body, which a worn or failed stock solenoid pack cannot deliver consistently after years of use.
• One rebuilt solenoid pack, 5.05 lb. This is a single component, not a kit. Confirm the part number and unit code against your transmission before purchasing.
• Before ordering, confirm the transmission code stamped on your unit matches 65RFE, 66RFE, or 68RFE and that the vehicle application falls within the 2009 and up production range.

What's in the box

• 1 x Solenoid, 68RFE Rebuilt Pack

Compatible vehicles

• Fits Durango [11-13], Ram 1500 1/2 Ton - Pickup [07-18], Ram 2500HD 3/4 Ton - Pickup [07-15], Ram 3500HD 1 Ton - Pickup [07-15], Ram 5500HD Pickup [08-09], Grand Cherokee [12-13].