48RE [03-UP] Automatic Transmission Valve Body Converted

When the hydraulic control section of the transmission fails, the valve body is the component that has to be addressed, and this converted unit is built specifically for A518, A618, 46RE, 47RH, and 48RE applications from 2003 and up. What sets this piece apart from a standard replacement is its converted configuration, which modifies the internal hydraulic routing to match the demands of the updated application range rather than simply duplicating the stock layout.

This is a single hard part, one valve body assembly, and nothing else is included in the shipment. There are no solenoids, no separator plate, no gaskets, no Automatic Transmission Filter, no friction clutches, and no steels packed with it. If your rebuild requires those components, they need to be sourced separately. Technicians working a complete automatic transmission overhaul should confirm their full parts list before placing this order to avoid delays at the bench.

The unit weighs 13.7 lb, which reflects the solid construction of the casting and the internal valving. REMCO has been working in automatic transmission parts since 1991, and each hard part that leaves the facility is checked against its item record before it ships. A packing list is included in the box so the receiving technician can confirm what arrived.

Before ordering, cross-reference your transmission identification tag against the model codes listed: A518, A618, 46RE, 47RH, and 48RE. Also confirm the build year falls within the 2003-and-up range covered by this converted valve body, since earlier units in the same family may use a different hydraulic configuration that this piece will not match.

• A direct converted valve body for 48RE and related units, addressing hydraulic control needs in the transmission rebuild.
• This listing is for the valve body unit only. It does not include solenoids, separator plates, gaskets, Automatic Transmission Filter, clutch packs, steels, or any additional components. Verify what else your job requires before ordering.
• The converted configuration on this valve body modifies the internal hydraulic circuit, which is the core functional difference from a standard unit in this application range.
• Single hard part: one converted valve body assembly. Shipping weight 13.7 lb. No additional pieces are bundled with this unit.
• Before ordering, confirm your transmission code matches A518, A618, 46RE, 47RH, or 48RE, and that your unit falls within the 2003-and-up application range for this converted version.

What's in the box

• 1 x Valve Body, 48RE CONVERTED

Compatible vehicles

• Fits Ram 2500 [03-10], Ram 3500 [03-10], Ram 1500 [04-06].