When the rear band in a 722.4 unit wears past its service limit, the transmission loses holding force at the point where it matters most, and no amount of adjustment brings it back. This is the direct replacement: a single rigid split-style rear band built to the geometry that 722.4 servos expect, not a universal piece trimmed to fit.
The rigid split design is not a cosmetic difference. It allows the band ends to seat independently against the drum surface, distributing apply force more evenly than a continuous flexible band would under repeated thermal cycling. In an automatic transmission that sees variable load and heat on every drive cycle, that even contact pattern matters for service life.
At 1.75 lb, this band ships as a single unit. There are no additional components in the box. It does not come with a front band, clutch discs, steel plates, Automatic Transmission Filter, gaskets, or any hardware. If your rebuild requires those items, they need to be sourced separately. REMCO pulled this band individually, checked it against the item record, and packed it with the parts list inside the box so you can verify on arrival.
REMCO has been working exclusively in automatic transmission parts since 1991, and every item leaves the warehouse assembled by hand here.
Before placing the order, confirm two things: that the code stamped on your unit is 722.4, and that the vehicle application falls between 1984 and 1997. This band is not shared across other transmission families, so the code on the case is the only reliable way to verify fit.
- Replacing this worn band stops slip and delayed engagement at the rear servo, letting the unit hold firm through every gear change without hunting for the right friction point.
- This listing covers the rear band only. It does not include front bands, clutch discs, steels, Automatic Transmission Filter, gaskets, or solenoids. Review your parts list before ordering to avoid a wasted trip.
- The rigid split construction keeps the band seated evenly against the drum during apply, reducing the uneven wear pattern that flexible single-piece bands can develop over repeated heat cycles in this unit.
- One rigid split rear band, 1.75 lb as packed. No additional components. The part number on the box matches what REMCO pulled and verified before sealing it.
- Before ordering, confirm the transmission code stamped on your unit reads 722.4 and that the application year falls within 1984 to 1997. Fit depends on both.
What's in the box
- 1 x Band, 722.4 RIGID Rear [Split] 97
Compatible vehicles
- Fits 190E [90-93], 300 [91-93], C220 [94-96], C280 [94-96], C36 [95-96].
| 722.4 Band RIGID Rear (Split) 1984-97 |
Default Title |
|---|