A904 [60-UP] Automatic Transmission Rear Band Rigid Reverse Rigid solid

When the reverse band in an A904, A998, or A999 unit is worn or damaged, a rigid solid replacement band of the correct width is the part that restores proper servo clamping and gets reverse engagement back in spec. What sets this particular band apart is its rigid solid construction at exactly 1.375 inches wide, a dimension that matters: installing a band of the wrong width or wrong flex rating into one of these automatic transmission units can lead to misadjustment, premature wear, or a servo that simply cannot generate the clamping force the circuit requires.

This listing is for a single band. There are no friction discs, no steel plates, no Automatic Transmission Filter, no gaskets, and no other components included. If you are mid-rebuild and working through a full overhaul, make sure you have your other parts sourced separately before this ships, because this is the band and nothing else.

The part covers A904, A998, and A999 units from 1972 onward. Before placing your order, pull the transmission code from the case or the vehicle documentation and confirm the unit is one of those three models. Also confirm that your specific application calls for a rigid band at the reverse servo position and not a flex-type band, since both exist for this transmission family and they are not interchangeable.

At REMCO, individual parts like this one are picked, checked against the part record, and packed one at a time. The part ships with its item record in the box so you can verify what you received the moment it arrives. REMCO has been working in automatic transmissions since 1991, and that process has not changed.

• This rigid solid reverse band is built to restore proper reverse engagement in A904, A998, and A999 automatic transmission units, helping prevent slippage and delayed gear response in reverse.
• This listing covers the band only. It does not include friction discs, steel plates, Automatic Transmission Filter, gaskets, or any other components. Verify your full rebuild parts list before ordering to avoid a return trip.
• The rigid construction of this band, measuring 1.375 inches wide, provides a firm, consistent surface contact that a flex-type band cannot match in applications where the servo and anchor pin setup calls for a solid band.
• One rigid solid reverse band, 1.375 in. wide, sized for A904, A998, and A999 units. Article weight: 1 lb. Packed and verified individually against its part record before it leaves the warehouse.
• Before ordering, confirm your transmission code is A904, A998, or A999 and that the application falls within the 1972-and-up range. Also verify your unit requires a rigid band, not a flex band, for the reverse circuit.

What's in the box

• 1 x Band, A904 RIGID Reverse Rigidsolid [1.375" Wide]

Compatible vehicles

• Fits Dart [60-65], D100 1/2 Ton - Pickup [60-65], D200 3/4 Ton - Pickup [60-65], W100 1/2 Ton 4WD - Pickup [60-65], Gladiator - Pickup [62-65], Valiant [60-65], Challenger [70-71], Polara [63-64], A100 1/2 Ton - Van [64-65], B200 3/4 Ton - Van [71], B300 1 Ton - Van [71], D300 1 Ton - Pickup [61-71].