When governor bore wear causes inconsistent shift points on a TH250 or TH350 unit, replacing the governor bushing is the direct mechanical correction, and this is the single bushing designed for that job. What separates this article from a kit is straightforward: it is one piece intended for one specific location, so you are not paying for components you already have on the bench.
The governor in a TH250 or TH350 automatic transmission is a speed-sensing device that works through hydraulic pressure. Its shaft rides inside a bushing, and when that bushing wears, the shaft develops excess movement that disrupts the pressure signal the transmission uses to decide when to upshift or downshift. Installing a fresh bushing restores the intended running fit between shaft and bore, which brings the governor signal back into the range the valve body expects.
This bushing applies to TH250 and TH350 transmissions from 1965 with no upper year cutoff. Coverage is stated as 65-UP on the application chart. Before placing the order, pull the tag or casting code from the unit on the bench and confirm it identifies as a TH250 or TH350. Do not assume model year alone is enough, because these transmission families spanned many vehicle applications over a long production run and other units may look similar.
The article ships as a single bushing. It does not include any other components. Article weight is 1 lb. At REMCO, parts like this one are pulled and verified against the order individually before they ship, so what you receive matches what is listed here.
- Governor service on TH250 and TH350 units calls for this bushing to restore proper fit between the governor assembly and its bore, reducing governor-related shift complaints.
- This listing covers the governor bushing only. It does not include friction discs, steel plates, Automatic Transmission Filter, gaskets, seals, or any other components. Verify what your service requires before ordering.
- The bushing is machined to a specific bore diameter that governs the running fit of the governor shaft. No honing compound or filler is used to reach that dimension; the part itself carries it.
- Single piece: one governor bushing. Article weight: 1 lb. Intended for TH250 and TH350 automatic transmission units built from 1965 onward.
- Before ordering, confirm the transmission code or tag on your unit reads TH250 or TH350. Year coverage starts at 1965 with no upper cutoff, but always match the part to the exact unit on the bench.
What's in the box
- 1 x Bushing, TH350 Governador
Compatible vehicles
- Fits Grand LeMans [75-81].
| bushing governador th350 Automatic transmission |
Default Title |
|---|