When the extension housing bushing wears down in a 4R70W, 4R75W, 4R70E, or AODE automatic transmission, output shaft movement increases, the rear seal leaks, and the damage spreads fast. This is a single bronze bushing measuring 1.606 inches inside diameter, sized specifically for the extension housing bore on those units from 1993 and up.
Bronze is the correct material here because it holds dimensional stability under the rotational load and heat that the extension housing sees in regular operation. A bushing that is even slightly oversized or undersized at that bore will not support the shaft correctly, so the 1.606 in ID is the spec to match against your unit before ordering.
REMCO has been working in automatic transmission parts since 1991, and every piece that ships from here is pulled, checked against the part record, and packed individually --. A parts list goes in the box so the technician at the bench can confirm the right piece arrived before the transmission is opened.
This listing covers one bushing. There are no seals, gaskets, o-rings, or any other parts included. If your job calls for a full reseal or additional bushings, those need to be sourced separately. Check your transmission identification tag or case casting code to confirm you are working with a 4R70W, 4R75W, 4R70E, or AODE before placing the order.
- Worn or loose extension housing bushing causes output shaft play and seal failure -- replacing this single piece addresses the root of that problem directly.
- This listing is for one bushing only. It does not include any seals, o-rings, gaskets, Automatic Transmission Filters, or other components. Verify your full parts list before ordering.
- Bronze construction holds tight tolerances at the extension housing bore, maintaining proper shaft alignment where a worn bushing allows unwanted movement and accelerates wear on surrounding parts.
- One bronze extension housing bushing, 1.606 in ID, weight 1 lb. Verified against its part record at REMCO before shipping, with a parts list included in the box.
- Before ordering, confirm your transmission code matches 4R70W, 4R75W, 4R70E, or AODE and that your unit falls within the 1993-and-up production range.
What's in the box
- 1 x Bushing, AODE 4R70W Extension Hsg [1.606" Id][bronze] 75w 4r70e 75e
Compatible vehicles
- Fits Mustang [94-95], E150 1/2 Ton Econoline - Van [97-02], E250 3/4 Ton Econoline - Van [97-02], F150 1/2 Ton - Pickup [94-95], Cougar [93-95], Crown Victoria [92-10], Thunderbird [92-97], Bronco [94-95], E150 1/2 Ton Econoline Club Wagon [97-99], E350 1 Ton Econoline - Van [97-00], Expedition [97-07], Expedition EL [07].
| bushing extension hsg (1.606 id)(bronze)1993-up aode 4r70w 75w 4r70e 75e Automatic transmission |
Default Title |
|---|
