CD4E [94-UP] Automatic Transmission Bushing Forward Sun Gear

When the forward sun gear bushing in a CD4E unit wears down, the result is shaft looseness that works against every other component trying to hold position during operation. Replacing this single piece at the right point in a rebuild addresses that specific failure without requiring additional parts that do not belong to this location.

This is a single bushing machined to fit the forward sun gear position in the CD4E automatic transmission. It is not a kit, not a set, and does not include seals, clutch packs, Automatic Transmission Filter, band, or any other bushing from a different position in the unit. Technicians who need multiple bushings for a full overhaul should source each position separately and confirm fitment for each one.

REMCO has been working in automatic transmission parts since 1991. Each piece that leaves the facility is pulled and checked individually before it is packed. The box includes a part list so the technician can verify what arrived matches what was ordered, without guesswork on the bench.

The CD4E is the transmission this bushing is dimensioned for, covering units from 1994 through 2016. Before placing the order, confirm the unit code on your transmission and check that the build date falls inside that range. Also confirm through your teardown that the forward sun gear bushing is the position showing wear, since substituting the wrong bushing into a bore leads to the same drivability problems the replacement was meant to solve.

• This bushing addresses wear at the forward sun gear position, where a degraded piece causes shaft play and inconsistent power transfer through the unit.
• This listing is for a single bushing only. It does not include any other bushings, seals, clutch discs, steels, Automatic Transmission Filter, or band. Verify the exact position needed before ordering.
• The forward sun gear bushing is a precision-fit piece machined to the dimensional spec of the CD4E bore. Proper fit at this location is critical to maintaining controlled shaft movement during operation.
• One forward sun gear bushing. Unit weight: 1 lb. Sourced and verified individually at the REMCO facility before shipment, with a part list included in the box.
• Before ordering, confirm your transmission is a CD4E unit and that the build date falls within 1994 to 2016. Cross-check the bushing position against your teardown inspection.

What's in the box

• 1 x Bushing, CD4E Forward Sun Gear

Compatible vehicles

• Fits Contour [95-00], Probe [94-00], Escape [01-02], X-Type [02], 626 [94-02], MX-6 [94-97], Tribute [00-02], Cougar [99-02], Mariner [04-08], Mystique [95-00].