6L90E [07-UP] Automatic Transmission Bushing Extension Housing (2wd) 2.030

When the extension housing bushing wears, output shaft movement increases and seal life drops sharply. This single bushing addresses that specific failure point in 2WD applications of the 6L80E and 6L90E automatic transmission, and its 2.030 in OD is the detail that separates it from other bushings used elsewhere in the same unit.

The 6L80E and 6L90E share a common architecture but demand precise fits at every bushing location. The extension housing bore on 2WD versions of these units requires this exact outside diameter. Installing a bushing with a different OD will not seat correctly and will not restore the shaft support the design requires. Measure your housing bore and compare it against the 2.030 in OD of this bushing before placing your order.

Each bushing at REMCO is selected individually and checked against its part record before it leaves the facility. The operation has been focused on automatic transmission components since 1991, and the picking process for individual pieces follows the same verification step used for multi-piece kits: the part number on the item is confirmed against the order before it ships.

This listing is for one bushing. No seals, gaskets, clutch friction discs, steels, bands, or Automatic Transmission Filters are included. If your repair requires additional components for the 6L80E or 6L90E, those are listed separately in the catalog.

Application check before ordering: confirm the transmission code is 6L80E or 6L90E, confirm the vehicle is a 2WD configuration, and confirm the model year falls within the 2007 and up range this bushing covers. Weight: 1 lb.

• Restores proper shaft support at the extension housing, preventing excessive play and premature wear in 2WD configurations of 6L80E and 6L90E units.
• This listing covers one bushing only. It does not include any seals, gaskets, Automatic Transmission Filters, clutch packs, steels, or other components. Verify your complete parts list before ordering.
• Designed specifically for the extension housing bore on 2WD versions of these units, this bushing measures 2.030 in OD, a dimension that must match your housing to seat correctly.
• Kit contents: 1 bushing, extension housing position, 2WD, 2.030 in OD. Article weight: 1 lb.
• Before ordering, confirm your transmission code is 6L80E or 6L90E, that the unit is a 2WD configuration, and that your housing bore accepts a 2.030 in OD bushing.

What's in the box

• 1 x Bushing, 6L90E Extension Housing [2WD] 2.030" OD

Compatible vehicles

• Fits CTS-V [07-15], Escalade/ESV/EXT [07-15], SRX [07-09], STS [07-11], XLR [07-11], Camaro [10-13], Corvette [07-11], SS [14-17], Avalanche [08-13], Express 2500 [10-11], Express 3500 [10-11], Silverado 1500 1/2 Ton [07-09].