6R80 ZF6HP26 6R60 [05-UP] Automatic Transmission Bushing Pump

A worn pump bushing in a 6R80, 6R60, or ZF6HP26 automatic transmission allows the pump shaft to shift off-center, which translates directly into reduced line pressure, erratic converter charge, and accelerated wear on the pump gears and bore wall. Replacing it with a correctly sized bushing is one of the foundational steps in a pump rebuild, and getting the right piece for the right unit matters before anything else gets assembled.

This listing covers a single pump bushing machined to the bore specifications of the 6R80, 6R60, and ZF6HP26 units. These three designations share the same pump bushing requirement, so the piece fits all three without modification. The bushing seats into the pump body and supports the input shaft at the pump end, keeping radial movement within the tolerances the valve body and clutch circuits depend on to maintain stable hydraulic pressure.

REMCO has been working in automatic transmissions since 1991, and each piece that leaves here is pulled, inspected, and packed by hand against its parts list. The box you receive includes that list so you can confirm the count before the part ever goes to the bench.

This is a single piece, not a kit. It does not include seals, gaskets, clutch discs, steels, Automatic Transmission Filter, or any other pump component. If your rebuild requires additional parts, source them separately. Before placing the order, verify that your unit is coded 6R80, 6R60, or ZF6HP26 by reading the tag or casting on the unit directly. Application covers 2005 forward through current production. Item weight is 1 lb.

• This pump bushing addresses wear at the pump bore that leads to pressure loss and fluid bypass inside the unit, helping restore proper hydraulic function.
• This listing is for the pump bushing only. It does not include any seals, gaskets, clutch packs, steels, Automatic Transmission Filter, or band. Review your parts list before ordering to avoid a return.
• The pump bushing is machined to fit the bore dimensions of 6R80, 6R60, and ZF6HP26 units, allowing the pump to hold the shaft centered and reduce side-load wear on the bore wall.
• One pump bushing. Item weight: 1 lb. REMCO pulls and inspects each piece individually before packing, and the box includes a parts list confirming what is inside.
• Before ordering, confirm your unit code is 6R80, 6R60, or ZF6HP26. Application begins 2005 and runs to current production. Verify the code on the unit itself, not only the vehicle year.

What's in the box

• 1 x Bushing, ZF6HP26 6R60 6R80 Pump

Compatible vehicles

• Fits Navigator/L [07], Mountaineer [07-08].