ZF6HP26 [05-UP] Automatic Transmission Bushing Stator Tube (Rear)

When the rear stator tube bushing wears beyond spec, internal end play open up and fluid pressure at that passage drops, making it harder for the automatic transmission to deliver consistent shift feel. This is a single bronze bushing, rear stator tube position, with a 1.022 in inside diameter, selected for 6R60 and ZF6HP26 units built from 2005 onward.

Bronze is the material of choice at this location because it maintains its dimensions under the heat and rotational load present at the stator tube. A bushing that holds its inside diameter keeps the tube centered and keeps fluid where it belongs instead of bleeding past a worn bore. The 1.022 in ID is the dimension that matters here: too loose and the tube moves, too tight and installation becomes a problem, so confirming that measurement against your worn piece before ordering is time well spent.

This listing is for one bushing. There are no additional components packaged with it, no seals, no other bushings, no gaskets. If your job calls for more than this one position, check the rest of your parts list separately. The article ships at 1 lb.

At REMCO, individual components like this one are pulled and checked against the part number before they go out, the same process used on every order since the shop opened in 1991 working exclusively in automatic transmission parts. That means the piece you receive has been confirmed against the spec before it leaves.

Before placing the order, verify the transmission code stamped on the unit reads 6R60 or ZF6HP26, and confirm the vehicle year is 2005 or later. If the code or the year does not match, this bushing is not the right one for that job.

• Restoring proper stator tube alignment reduces internal fluid loss and helps avoid the bushing wear that leads to pressure drop and erratic shift behavior in 6R60 and ZF6HP26 units.
• This listing covers one bushing only. It does not include any other bushings, seals, gaskets, or additional components. Review your parts list before ordering to confirm this is the specific piece you need.
• Bronze construction at the rear stator tube position handles the rotational load at that location without the dimensional changes that softer materials develop after extended heat cycling inside the unit.
• One bronze bushing, rear stator tube, 1.022 in inside diameter, sized for 6R60 and ZF6HP26 applications. Article weight: 1 lb.
• Before ordering, confirm the transmission code on the unit matches 6R60 or ZF6HP26 and that the application year falls within the 2005-and-up range covered by this part.

What's in the box

• 1 x Bushing, ZF6HP26 Stator Tube

Compatible vehicles

• Fits 3, 5, 6, 7 Series and X3 and X5 [05-14], A4, A6, A8 and Q7 [05-14], S-Type, XF and XJ [05-14], Range Rover [05-13], Falcon [02-14]. Rear wheel drive and all wheel drive six speed with 6 and 8 cylinder engines.