When the inner sprag race bushing in an AX4N or AXODE automatic transmission wears down, the sprag assembly loses the support it needs to function, and no amount of clutch or seal work will fix that. This single bushing is cut with 12 evenly spaced slots and measures 5/8 in. wide, dimensions that match the specific bore geometry of the AX4N and AXODE family going back to 1986 and covering current production.
The slot pattern is not decorative. Those 12 openings control fluid distribution and weight relief inside the bore, so a bushing without the correct count will not behave the same way under load. If you are rebuilding or diagnosing one of these units and the inner sprag race bushing is the part you need, the dimensions here are what the application calls for.
This is a single-piece order. There are no clutch discs, no steels, no seals, no Automatic Transmission Filter, and no additional hardware in the package. If your rebuild requires those components, they need to come from separate listings. Ordering only what you actually need keeps the job organized and avoids having to return parts that were never missing.
REMCO has been working in automatic transmission parts since 1991. Each piece is pulled individually and checked against its part record before it ships. A part list ships inside the box confirming what was packed.
Before placing the order, check that the transmission identification tag or stamping on your unit reads AX4N or AXODE and that the vehicle or equipment year is 1986 or later. Those two data points are what determine whether this bushing is correct for your application.
- Restores proper sprag race support in AX4N and AXODE units, addressing bushing wear that leads to slippage and premature failure of surrounding components.
- This listing covers a single bushing only. No clutch packs, steels, seals, Automatic Transmission Filters, or additional parts are included. Verify your full parts need before ordering.
- Twelve evenly spaced slots and a 5/8 in. width define this inner sprag race bushing, dimensions specific to the AX4N and AXODE bore where standard bushings do not fit.
- One bushing, 12 slotted holes, 5/8 in. wide, approximately 1 lb. shipped. Pulled and checked against part record before leaving the warehouse.
- Confirm the transmission code on your unit reads AX4N or AXODE and that the application year falls within the 1986-and-up range before ordering.
What's in the box
- 1 x Bushing, AXODE AX4S AX4N Some Inner Sprag Race [W 12 Slotted Holes] [5 8 Wide]
Compatible vehicles
- Fits Taurus [94-99], Continental [95-02], Sable [95-99].
| bushing some inner sprag race (w 12 slotted holes) (5 8 wide) axode ax4s ax4n Automatic transmission |
Default Title |
|---|