[91-UP] Automatic Transmission Filter Sump (Internal-disassembly Required)

When hydraulic pressure drops and shift feel suffers in a TAAT-family unit, the internal sump Automatic Transmission Filter is one of the first components to check, because it sits on the feed side of the valve body and cannot be serviced without going into the transmission. This listing covers one internal sump Automatic Transmission Filter, part number, designed for TAAT MP6 and MP7 automatic transmission units produced from 1991 through 2002.

Unlike the external spin-on or drop-in Automatic Transmission Filters that sit above the pan gasket, this Automatic Transmission Filter requires partial disassembly of the unit to reach. That distinction matters at the planning stage: pulling the pan alone will not get you there. Factor the additional labor into the job estimate before the unit is on the bench.

The Automatic Transmission Filter itself weighs 1 lb and ships as a single piece. There are no seals, gaskets, clutch plates, steels, or additional hardware in this listing. If your repair calls for those components, they need to be sourced separately. REMCO has been working in automatic transmission parts since 1991 and assembles each order by hand, verifying the contents against the part number before it ships, so what you receive matches what is listed here.

Before placing the order, confirm three things on the physical unit: the transmission identification code, the production year, and that the assembly is a TAAT MP6 or MP7 variant. Ordering on vehicle year alone is not sufficient because different transmissions were used across overlapping model years and body styles.

• Restoring proper fluid flow through the valve body starts with a clean sump Automatic Transmission Filter; a clogged or degraded internal Automatic Transmission Filter restricts hydraulic pressure and leads to shift complaints that no external service will fix.
• This listing is for the internal sump Automatic Transmission Filter only. It does not include seals, gaskets, bands, clutch packs, steels, or any other rebuild components. Confirm the full scope of your repair before ordering.
• Reaching this Automatic Transmission Filter requires partial disassembly of the unit; it sits inside the sump on the internal side of the pan, not accessible by a standard pan-drop service alone. Plan the job accordingly before the transmission comes out.
• Kit contents: 1 internal sump Automatic Transmission Filter for TAAT MP6 and MP7 applications. Item weight: 1 lb. The part number for this Automatic Transmission Filter is.
• Before ordering, verify the transmission code on the unit itself, the model year of the vehicle, and that the unit is a TAAT MP6 or MP7 variant built between 1991 and 2002.

What's in the box

• 1 x Automatic Transmission Filter, Sump TAAT

Compatible vehicles

• Fits LS [00-02], LW1 [00-02], LW2 [00-02], SC [91-92], SC1 [93-02], SC2 [93-02], SL [91-02], SL1 [91-02], SL2 [91-02], SW1 [93-99], SW2 [93-01], SWP [00-01].