[83-UP] Automatic Transmission Filter A43DEA44DEA46DE

Replacing the Automatic Transmission Filter on an AW372 automatic transmission is a straightforward service step, and this listing gives you the single Automatic Transmission Filter unit that fits A42DL and A43DE applications in the 1990-and-later production range. What sets this item apart from a kit listing is exactly that: it is one piece, nothing added, nothing bundled, so you are ordering precisely what the job calls for without paying for components you may already have on the bench.

The AW372 Automatic Transmission Filter sits at the inlet of the hydraulic circuit inside the pan. Over time, accumulated debris restricts flow through the pickup, and reduced volume reaching the pump can cause soft shifts or delayed engagement even when the internal clutch pack is still serviceable. Swapping the Automatic Transmission Filter during a fluid service is standard practice on these units and is often the first corrective step before any deeper teardown is considered.

This Automatic Transmission Filter is cataloged under both the A42DL and the A43DE model designations, both of which share the AW372 unit code. The item weighs 1 lb. No gaskets, seals, bands, clutch discs, steel plates, or solenoids are included. If your service calls for a full pan gasket or an Automatic Transmission Filter-and-gasket combination, that would be a separate purchase.

REMCO has worked in automatic transmission parts since 1991. Each item that leaves the facility is checked against its catalog entry before it ships, and a part list is included in the box so you can verify what arrived matches what was ordered. For a single-piece Automatic Transmission Filter this means confirming the part number and application code before the box is opened.

Before placing the order, verify the transmission identification tag reads AW372 and that the unit falls under the A42DL or A43DE catalog designation. Application runs from 1990 forward.

• One Automatic Transmission Filter is what this listing covers: a single replacement Automatic Transmission Filter for AW372 units, giving you the exact part to address fluid flow and debris pickup in the valve body circuit.
• This listing does not include gaskets, seals, bands, clutch discs, steels, or any rebuild kit components. If you need a complete overhaul set, verify your full parts list before ordering this Automatic Transmission Filter alone.
• The AW372 Automatic Transmission Filter seats directly in the pan and is the starting point of any fluid service on these units; a clogged or worn Automatic Transmission Filter restricts flow and can trigger erratic shift behavior before any internal wear is present.
• Single Automatic Transmission Filter unit weighing 1 lb, cataloged under A42DL and A43DE applications within the AW372 family. No additional hardware is packed with this item.
• Before ordering, confirm your transmission identification code is AW372 and that your unit matches the A42DL or A43DE catalog reference for the 1990-and-later application range.

What's in the box

• 1 x Automatic Transmission Filter, A43DEA44DEA46DE

Compatible vehicles

• Fits Amigo [89-94], EVR Tilt Cab [88-92], Pickup [88-95], Sportage [95-02], Miata [98-05].