Getting the valve body Automatic Transmission Filter right on these units is not optional: a restricted or mis-sized screen starves the hydraulic circuits and turns a straightforward rebuild into a comeback. This is a single Automatic Transmission Filter screen designed for the valve body position on BMXA, MP7A, and S4RA automatic transmission units covering the 1994 to 2005 application range, with a .570 inch outside diameter and a .125 inch thick rubber boot that seats the Automatic Transmission Filter against the bore.
The single-bolt mounting design means installation position is fixed and repeatable, which removes one variable from the reassembly process. The rubber boot thickness of .125 inch is a dimension worth measuring on the unit before ordering, because a boot that is too thin or too thick will not seal the Automatic Transmission Filter correctly against the valve body surface, and fluid will bypass the screen entirely.
This listing covers one Automatic Transmission Filter screen. It does not include friction discs, steel plates, gaskets, solenoid seals, bands, or any other overhaul components. If you are doing a full rebuild, check your parts list against what you already have before placing the order.
At REMCO, operating in automatic transmissions since 1991, each part is handled and checked individually before it goes into the box, and a part record ships with it so you can verify what you received. There are no pre-packed assortments: every order is assembled by hand from the catalog line.
To confirm fitment, locate the transmission code on the unit itself and match it to BMXA, MP7A, or S4RA. The year range is 1994 through 2005. Cross both data points before ordering.
- Restoring proper fluid flow through the valve body helps avoid pressure loss and shift complaints caused by a clogged or degraded screen Automatic Transmission Filter. Replacing this part is a direct step toward recovering correct hydraulic behavior in the unit.
- This listing is for the Automatic Transmission Filter screen only. It does not include any friction discs, steel plates, gaskets, seals, bands, or overhaul kit components. Verify your complete parts list before ordering so nothing is missing when you open the transmission.
- This Automatic Transmission Filter mounts with a single bolt directly in the valve body. Key dimensions are .570 inch outside diameter and a .125 inch thick rubber boot, details that matter when confirming fitment against the stock part being replaced.
- One Automatic Transmission Filter screen, single-bolt mount, .570 OD, rubber boot thickness .125 inch, item weight 1 lb. Each unit is pulled and inspected individually against its part record before it ships from the REMCO facility.
- Before ordering, confirm the exact transmission code stamped on the unit matches BMXA, MP7A, or S4RA, and cross the model year against the 1994 to 2005 application range. Do not rely on vehicle year alone.
What's in the box
- 1 x Valve Body, Automatic Transmission Filter 1 Bolt Screen [Some] [In ] [.570 OD] [.125" Thick Rubber Boot]
Compatible vehicles
- Fits Civic [01-05].
| filter 1 bolt Screen (Some) (In Valve Body) (.570 OD) (.125 Thick Rubber Boot) |
Default Title |
|---|