6L45 [07-UP] Automatic Transmission Filter

Keeping the Automatic Transmission Filter in working condition is one of the most direct ways to protect hydraulic pressure and shift response in 6L45 and 6L50E units. This listing covers a single Automatic Transmission Filter designed for those transmissions as produced from 2007 onward, and it fits the inlet and mounting configuration those units require without modification.

The Automatic Transmission Filter sits between the fluid pan and the valve body, and its job is to keep debris out of the hydraulic circuits that control clutch apply and release. When the screen becomes restricted, pressure drop across the Automatic Transmission Filter increases and the transmission control system loses the stable oil supply it needs to fire solenoids cleanly. Replacing a worn or plugged Automatic Transmission Filter at service time addresses that restriction directly.

This is a single-piece item. It does not include a pan gasket, solenoids, friction clutches, steels, or any other rebuild components. If your service calls for a full overhaul, you will need to source those parts separately. Review your job requirements before placing the order.

At REMCO, individual parts like this one are pulled, inspected, and packed against a checklist before shipping. That process has been in place since 1991, when the company began specializing in automatic transmission parts. The box includes a parts list so you can confirm what arrived matches what was ordered.

Before purchasing, verify that your unit carries the 6L45 or 6L50E designation and that it was assembled in 2007 or later. The unit code is typically stamped on the transmission case or listed on the stock build documentation. Ordering against the correct code helps avoid fitment issues and avoids unnecessary returns.

• Restores proper fluid flow through the 6L45 and 6L50E valve body, addressing sluggish shifts and pressure loss caused by a clogged or failing Automatic Transmission Filter.
• This listing is for the Automatic Transmission Filter only. It does not include gaskets, seals, solenoids, or any other components. Review your rebuild parts list before ordering.
• Designed specifically for 6L45 and 6L50E units built from 2007 onward, this Automatic Transmission Filter matches the stock inlet geometry and screen area for those transmissions.
• Single Automatic Transmission Filter, weighing 1 lb. No additional pieces are included. Verify the part fits your exact unit code before placing your order.
• Before ordering, confirm your transmission code is 6L45 or 6L50E and that your unit was built in 2007 or later. Cross-reference the application year with your build date.

What's in the box

• 1 x Automatic Transmission Filter, 6L45

Compatible vehicles

• Fits 1 Series [08-13], 328i/xi [07-09], X3 [07-11], X5 [09], X6 [08-09], ATS [13-15], CTS [08-14], SRX [07-11], STS [08-11], XLR [07-11], Camaro [10-15], Colorado [15-17].