When a 4L60E, 4L65E or 4L70E automatic transmission comes apart and the clutch packs show heat damage or glazing, this Performance Friction Kit gives you all 24 replacement friction plates organized by clutch position so nothing gets sourced separately. What sets this kit apart is the range it covers in a single box: five distinct clutch applications, each with its own friction thickness spec, rather than a one-size batch that leaves you guessing.
The 3-4 clutch position gets 8 high-performance red frictions measured at .062 inch, a material chosen for that specific load and heat cycle. Forward clutch is covered by 5 frictions at .070 and an additional 5 ADP-002657 frictions for that pack. Reverse input clutch adds 4 frictions also at .070, and the overrun clutch rounds out the kit with 2 frictions at .078. Every thickness is deliberate: these are not interchangeable across positions.
This kit does not include steel plates, an Automatic Transmission Filter, bands, seals, gaskets or any other rebuild components. It is a friction-only kit. If your job calls for those parts, source them before the transmission goes back together.
REMCO has been working in automatic transmission parts since 1991. Each kit is assembled here by hand, piece by piece, checked against its parts list before the box closes. A printed parts list ships inside the box so you can verify count on the bench. Total shipped weight is 2 lb.
Before placing the order, pull the tag off the unit and confirm the transmission model code, the production year and the engine configuration match the 4L60E, 4L65E or 4L70E application this kit is built for.
- This kit delivers all 24 friction plates needed to rebuild the clutch packs in 4L60E, 4L65E and 4L70E units, covering five separate clutch applications in one box.
- No steels, no Automatic Transmission Filter, no bands, no gaskets and no seals are included. This is a friction-only kit. If your job requires those parts, verify your order before purchasing.
- The 3-4 clutch set uses high-performance red frictions at .062 thickness, while forward clutch runs .070, reverse input .070, and overrun clutch .078, each spec matched to its position.
- Box contains: 8 x 3-4 clutch frictions .062 hi-perf red, 5 x ADP-002657 frictions, 5 x forward clutch frictions .070, 4 x reverse input frictions .070, 2 x overrun frictions .078. Total: 24 pieces. Weight: 2 lb.
- Before ordering confirm the transmission code on the unit tag, the production year and engine application to make sure all five clutch sets in this kit match your specific build.
What's in the box
- 8 x Friction Clutch Plate, TH700-R4 stage-1 3-4 .062" Thick [High Performance Red] 06
- 5 x Friction Clutch Plate, TH700-R4-4L60E Forward .070" Thick
- 5 x Friction Clutch Plate, 8684089
- 4 x Friction Clutch Plate, 4L60E 65e Reverse Input .070" Thick l1987-up
- 2 x Friction Clutch Plate, 4L60E Overrun .078" Thick
Compatible vehicles
- Fits Silverado 1500 [99-13], Sierra 1500 [99-13], Silverado 2500 [99-05], Sierra 2500 [99-05], C1500 [93-99], K1500 [93-99], C2500 [93-99], K2500 [93-99], Tahoe [95-10], Yukon [93-09], Suburban 1500 [93-08], Yukon XL 1500 [00-08], Avalanche [02-08], Escalade [99-06], Express [96-14], Savana [96-14], TrailBlazer [02-09], Envoy [03-09], Rainier [04-07], Ascender [03-08], 9-7X [05-09], Colorado [04-12] (diff. filter), Canyon [04-12] (diff. filter), H3 [05-10], SSR [03-06], Astro [93-05], Safari [93-05], S10 Blazer [93-05], Jimmy [93-05], S10 [93-04], Sonoma [93-04], Corvette [94-05], Camaro [94-02], GTO [04-06], Caprice [94-96], Roadmaster [94-96], Fleetwood [94-96], H2 [04-07].
| CLUTCH POWER PACK HUGH FRICTIONS 4L60E |
Default Title |
|---|