4F27E FNR5 FN4A-EL [06-UP] Automatic Transmission Friction Module

Once friction material glazes over, no amount of line pressure brings the holding capacity back.

4F27E Fnr5 Fn4A-El Friction Module. This pack restores the torque capacity the unit had when it left the line.

The facing holds up to repeated apply cycles without separating, which is the failure mode that sends a rebuild back apart. Shipping weight is 2 lb.

The parts list below is exactly what ships. Compare it against your teardown before ordering.

REMCO has supplied automatic transmission parts since 1991, and every order ships with its part listing so the receiving technician can check what arrived against what was ordered.

• Clutch pack slippage and burnt friction material are what this kit addresses, giving each clutch pack a full set of new friction plates to restore holding capacity across the unit.
• THIS KIT CONTAINS FRICTION PLATES ONLY. No steel plates, no Automatic Transmission Filter, no seals, no gaskets, no band. Verify what else your rebuild requires before ordering.
• Six distinct clutch applications are covered in one box: overdrive 3-4 clutch, low reverse clutch, direct 3-4 single-sided ID and OD spline plates, reduction brake clutch, and reverse clutch, each part counted and matched to its position.
• 22 friction plates total: 6 overdrive 3-4 two-sided .063 32t 4.527 OD, 5 low reverse .063 42t 6.079 OD, 3 direct 3-4 one-sided ID spline, 3 direct 3-4 one-sided OD spline, 3 reduction brake .070 32t 4.520 OD, 2 reverse .063 32t 5.515 OD. Kit weighs 2 lb.
• Before ordering, confirm your unit code is 4F27E or FNR5 and that the application year falls within the [06-ON] range. Plate counts and specs vary by build, so cross your teardown against this list.

What's in the box

• 6 x Friction Clutch Plate, 4F27E FNR5 Overdrive [3-4]clutch [2-sided] .063" Thick 32 Teeth 4.527" OD
• 5 x Friction Clutch Plate, 4F27E FNR5 Low Reverse .063" Thick 42 Teeth 6.079" OD
• 3 x Friction Clutch Plate, FN4A-EL FNR5 Direct [3-4] [1-sided ID Spline [ 10 ]]
• 3 x Friction Clutch Plate, FN4A-EL FNR5 Direct [3-4] [1-sided OD Spline [ 10 ]]
• 3 x Friction Clutch Plate, FNR5 Reduction Brake .070" Thick 32 Teeth 4.520 od2005-up
• 2 x Friction Clutch Plate, 4F27E FNR5 Reverse .063" Thick 32 Teeth 5.515" OD

Compatible vehicles

• Fits Focus [00-10], Fusion [06-10], Zephyr [06-07], 3/i/s [05-12], 5 [08-14], 6/i [05-13], CX-7i [10-12], Milan [06-09].