A518 46RH A727 A618 [71-UP] Automatic Transmission Seal Kit [ TF-8 ] Bushings

When the front pump on an A727, A518, or A618 unit starts leaking or loses line pressure, the gasket, o-ring, seal, and bushing are the first components to inspect, and this four-piece set gives you all of them in a single order. What makes this set specific is the combination: a paper pump gasket, a rubber pump o-ring, a metal clad front seal, and a bronze bushing sized for the pump body of these three transmission families, nothing generic, nothing borrowed from a different application.

Each of the four pieces is picked and packed individually at REMCO, where the team has worked with automatic transmission parts since 1991. The box ships with a printed parts list so the technician at the bench can verify the count before the unit goes on the stand. That list also makes it easier to cross-reference against the job order and confirm nothing was missed.

This set does not include friction clutches, steel reaction plates, an Automatic Transmission Filter, a band, or any other internal components. If the rebuild calls for those parts, they need to be sourced separately. The scope here is strictly the front pump sealing and bushing assembly.

Application covers A727, A518, and A618 automatic transmission units from 1971 forward. Before placing the order, locate the transmission identification code on the actual unit, not just on the vehicle paperwork, and confirm it matches one of those three codes. Year of application should also fall within the 1971-and-up range. The set weighs 0.5 lb as packaged.

• Fluid leaks and pressure loss at the front pump cut transmission life short; replacing the gasket, o-ring, seal, and bushing together addresses the root causes of pump-side failure in one service.
• This set covers front pump components only and does not include friction discs, steel plates, Automatic Transmission Filter, bands, or any other internal parts; check your full rebuild parts list before ordering to avoid missing items.
• Four components matched to the same pump application: a metal clad front seal, a rubber o-ring, a paper gasket, and a bronze bushing for the pump body, all selected for A727 A518 A618 front pump geometry.
• Contents: 1 pump gasket, 1 pump o-ring, 1 front metal clad seal, 1 bronze pump body bushing; 4 pieces total, shipped in a labeled box with a parts list included. Package weight: 0.5 lb.
• Before ordering, confirm the transmission code stamped on the unit matches A727, A518, or A618, and verify the model year falls within the 1971-and-up application range covered by this set.

What's in the box

• 1 x Seal, A727 A518 A618 Front Metal Clad
• 1 x Gasket, A727 A518 A618 Pump
• 1 x Pump, A727 A518 A618 O-ring
• 1 x Bushing, A727 A518 Pump Body [Bronze]

Compatible vehicles

• Fits Ram 1500 1/2 Ton - Pickup [04-06], Ram 1500 1/2 Ton - Van [03-07], Ram 2500 Mega Cab 3/4 Ton - Pickup [06-07], Ram 2500HD 3/4 Ton - Pickup [04-07], Ram 3500 Mega Cab 1 Ton - Pickup [06-09], Ram 3500HD 1 Ton - Pickup [03-09], Ram 4500HD Pickup [05-07].