4R70W 4R75W AODE [92-UP] Automatic Transmission Kit Seal Pump fiodE4R75W

$42.98

seal pump KIT fiodE4R70W4R75W: Default Title

Default Title
Add to Wishlist

american expressapple paymasterpaypalshopify payvisa
Description

Stopping a front pump leak on a 4R70W, 4R75W, or AODE automatic transmission means replacing every sealing surface at that pump, and this set gives you the four pieces that do exactly that in one shipment. What makes this set specific is the combination of components: the pump gasket and o-ring cover the mating surfaces, the metal clad seal with flange handles the front seal at the pump bore, and the E4OD pump bushing rounds out the pump assembly needs, so the technician is not hunting for one leftover piece after the unit is already open.

The pump gasket applies to FIOD, FIOD, 4R70, and 4R75 units from 1992 up. The pump o-ring covers that same family from 1980 up. The front pump metal clad seal with flange is rated for AODE, 4R70, and 4R75 from 1992 up. The E4OD pump bushing completes the set. Every one of these four pieces is pulled and verified at the REMCO bench against the packing list before the box is sealed, and that list ships inside the box. REMCO has been working in automatic transmission parts since 1991, and each set is assembled here rather than dropped in as a prepackaged unit.

This set does not include friction clutches, steel plates, Automatic Transmission Filter, or band. If your rebuild requires those, source them separately. Confirm the transmission code stamped on the unit and the model year before placing the order: the 4R70W, 4R75W, and AODE [92-ON] are the covered applications and nothing outside that range is addressed by these four pieces.

  • A leaking front pump causes pressure loss and slipping shifts; this set addresses the gasket, o-ring, metal clad seal, and bushing at the pump in one order.
  • This set does NOT include friction discs, steel plates, Automatic Transmission Filter, bands, or solenoids. Review your parts list before ordering to confirm nothing else is needed.
  • The front pump bushing from an E4OD pairs with the AODE/4R70W/4R75W pump gasket, o-ring, and metal clad flange seal, covering the full pump sealing surface in a single set.
  • Contents: 1 FIOD/4R70/4R75 pump gasket [92-UP], 1 FIOD/4R70/4R75 pump o-ring [80-UP], 1 AODE/4R70/4R75 front pump metal clad seal with flange [92-UP], 1 E4OD pump bushing. Total weight: 1 lb.
  • Before ordering, confirm the transmission code on the unit, the model year, and that your application is 4R70W, 4R75W, or AODE [92-ON]. These four pieces serve that range only.

What's in the box

  • 1 x Pump, AODE 4r70 4r75 Front W Flange Metal Clad Seal
  • 1 x Gasket, Aod/fiod E 4r70 4R75 Pump
  • 1 x Pump, Aod/fiod E 4r70 4R75 O-ring
  • 1 x Bushing, E4OD Pump

Compatible vehicles

  • Fits Mustang [94-95], E150 1/2 Ton Econoline - Van [97-02], E250 3/4 Ton Econoline - Van [97-02], F150 1/2 Ton - Pickup [94-95], Cougar [93-95], Crown Victoria [92-10], Thunderbird [92-97], Bronco [94-95], E150 1/2 Ton Econoline Club Wagon [97-99], E350 1 Ton Econoline - Van [97-00], Expedition [97-07], Expedition EL [07].
Additional Information
seal pump KIT fiodE4R70W4R75W

Default Title