[10-UP] Automatic Transmission Filter Allison 1000 2400 Series lt1000

Getting the bottom pan back on a 1000 or 2000 series unit means having both the Automatic Transmission Filter and the cork pan gasket ready at the same time, and this two-piece set covers exactly that without bundling parts you may already have on hand. What separates this from a broader kit is the specificity of the Automatic Transmission Filter: it is the shallow-pan 2nd design, applicable from E06-up production, which means units built 2010 and on. Installing an Automatic Transmission Filter intended for the earlier deep-pan configuration on one of these transmissions will not seat correctly and can compromise fluid pickup, so the design generation is not a minor detail.

For any automatic transmission service where the pan comes off, the cork gasket takes the compression set from the previous installation and should be replaced rather than reused. The cork bottom pan gasket included here is sized for the 1000 and 2000 series lower pan. Both pieces ship together, verified against the packing list before the box closes, which is standard practice at REMCO for every order that goes out.

This set does not include friction discs, steels, sealing rings, or any internal components. It is a targeted two-piece combination for technicians who need only the pan-end consumables on a 1000 or 2000 series unit and already have everything else. If your rebuild requires additional soft parts, those would need to be sourced separately.

Before placing the order, verify that the transmission code is LT1000, that the pan is the shallow 2nd-design configuration, and that the unit falls in the 2010-and-later range. Total shipped weight is 1 lb. A packing list is included in the box confirming both pieces.

• Restoring the bottom pan seal and renewing the Automatic Transmission Filter in one order removes two separate sourcing steps and reduces the risk of a dirty sump after rebuild.
• This set does NOT include friction discs, steel plates, sealing rings, thrust washers, bands, or any internal clutch components. Review your full parts list before ordering to confirm nothing else is needed.
• The Automatic Transmission Filter here is the shallow-pan 2nd design specific to E06-and-later units. Installing the wrong Automatic Transmission Filter depth on these units causes improper fluid pickup and pressure issues, so matching the design generation matters.
• Contents: 1 Allison 1000 2000 shallow pan Automatic Transmission Filter (2nd design, E06-up) and 1 cork bottom pan gasket. Total shipped weight: 1 lb. No additional pieces are included.
• Before ordering, confirm your transmission code is LT1000 and that the unit is a 2nd-design shallow-pan configuration built 2010 or later. Fitting year and pan design both determine correct application.

What's in the box

• 1 x Pan Gasket, ALLISON 1000 Bottom Pan Cork
• 1 x Automatic Transmission Filter, ALLISON Shallow Pan 2nd Design E06-Up 10002000

Compatible vehicles

• Fits C4500 1 1/2 Ton Truck [10-15], C5500 2 Ton Truck [10-15], C8500 [10-15].