A240 A241 A245 A246 A247 [85-25] Automatic Transmission Filter E L ON AAND

Replacing the pan gasket and Automatic Transmission Filter at the same time is one of the most common service steps on A240-series automatic transmission units, and this two-piece set puts both items in one box so the job does not stall waiting on a second order. What makes this set specific is the combination of a duraprene bottom pan gasket sized for A245E and A246E units with an Automatic Transmission Filter that covers A245E, A246E, and A247E applications from 1993 up, all within a single SKU that applies across a wide year range starting in 1985 for the gasket application.

The duraprene pan gasket is the same gasket used in full rebuild kits on these units. Duraprene compresses evenly, does not extrude under normal pan-bolt torque, and does not require additional sealant when the mating surfaces are clean and flat. Technicians who have used cork or paper gaskets on these pans and dealt with seepage at the corners will notice the difference immediately.

The Automatic Transmission Filter included here is the correct drop-in design for A245E, A246E, and A247E units built from 1993 onward. If the unit you are working on predates 1993, this Automatic Transmission Filter is not the right one and you should verify the Automatic Transmission Filter part number against the stock before ordering.

This set does not include friction clutch discs, steel reaction plates, bushings, or any other internal sealing rings. It is a pan-service set, not a full overhaul kit. REMCO assembles each order individually, pulling the gasket and Automatic Transmission Filter from inventory and checking them against the item list before the box is sealed. A copy of that item list ships inside the box, so you can confirm both pieces are present before the technician opens the bag.

Before placing the order, confirm the transmission code on the unit matches A240, A241, A245, A246, or A247, and verify the build year to ensure the Automatic Transmission Filter application applies.

• Pan service on A240-series units is straightforward when both the gasket and Automatic Transmission Filter arrive together, ready to install without hunting down separate parts.
• This set does NOT include friction discs, steel plates, or a sealing ring kit. If your rebuild needs those, check your parts list before ordering to avoid a second shipment.
• The pan gasket is duraprene material, which holds its shape under heat cycles and seats evenly against the pan rail without requiring sealant when properly torqued.
• Exact contents: 1 duraprene bottom pan gasket for A245E A246E units and 1 Automatic Transmission Filter for A245E A246E A247E from 1993 up. Total shipped weight is 1 lb.
• Before ordering, confirm the transmission code stamped on the unit, the model year, and whether the Automatic Transmission Filter application starts at 1993 or later, since this Automatic Transmission Filter does not cover earlier Automatic Transmission Filter designs.

What's in the box

• 1 x Pan Gasket, A245E A246E Bottom Pan Duraprene
• 1 x Automatic Transmission Filter, A245EA246E247E 02

Compatible vehicles

• Fits Prizm [98-02], Vibe [03-07], Celica [89-93], Corolla [85-92], Matrix [03-06], MR2 [87-95], Paseo [92-99], Rav4 [96-99], Tercel [90-99].