Smart Products Filter Index - Do not delete

Shift timing lives in the valve body, and worn bores put that timing out of range.4L80E Valve Body Kit ligas y ajuste de tambor 2009. This restores the apply rates...

Debris in the valve body holds a valve open just long enough to burn the pack it feeds.4F27E Shift Kit correctiontransgo 2006. This restores the apply rates the shift schedule...

Debris in the valve body holds a valve open just long enough to burn the pack it feeds.4R70W Valve Body Kits / Correction Products. This returns the hydraulic side of...

Worn valve bores and stuck valves both show up as pressure that does not reach the clutch it was meant for.TH2004R reprogramming kit blue box 1981. This restores the apply...

Valve body wear mimics clutch wear exactly, which is how good packs get replaced for no reason.A904 no yo-yo) shift kit. This returns the hydraulic side of the unit to...

The cost of a wrong part is never the part; it is the second teardown.4L60E Miscellaneous Components. This restores the component to its stock specification.The unit code on the tag...

Using the wrong component in an automatic transmission rebuild costs the job twice: once for the part and again for the teardown.4T60E 440-t4 4th clutch hub 1983--up bearing. This replacement...

Using the wrong component in an automatic transmission rebuild costs the job twice: once for the part and again for the teardown.FIOD e 4R70 75w 1-2 accum (purple) (hi perf)...

Sprag failure usually takes the elements it rides against with it.4R70W FIOD 4R70W e holds intermediate sprag retainer snap ring. Cage and elements are matched as a set.Race surface finish...

For TH700-R4 automatic transmissions. Automatic transmission components are unit specific, and the differences are rarely visible side by side.4L60E stator to input drum bearing. The piece is produced to the...

Parts within one transmission family are often dimensionally different by build date.TH-125 Miscellaneous Components. It is cataloged against the unit code rather than the vehicle.Dimensions are matched to the position,...

A component sourced by appearance instead of by unit code is a repair waiting to come back.AC60E E9TZ-7D234-A - Miscellaneous Components. The piece is produced to the dimensions the position...

Using the wrong component in an automatic transmission rebuild costs the job twice: once for the part and again for the teardown.A413 placa directa 1980. The piece is produced to...

For AXODE automatic transmissions. Sealing rings are the smallest parts in the unit and the ones that decide whether pressure gets where it is going.4F50N 4s 4n o-ring style all...

Automatic transmission components are unit specific, and the differences are rarely visible side by side.TH200 gobernador cover. It is cataloged against the unit code rather than the vehicle.Internal specifications change...

The cost of a wrong part is never the part; it is the second teardown.A500 accumulator (.126 od wire) spring. It is cataloged against the unit code rather than the...

Automatic transmission components are unit specific, and the differences are rarely visible side by side.AX4N (3 4 wide) sprocket) non-flex (43 links)(hv075) (2.5l 3.0l) chain. This restores the component to...

For JF009E automatic transmissions. Using the wrong component in an automatic transmission rebuild costs the job twice: once for the part and again for the teardown.CVT belt CVT remanufactured. This...

Using the wrong component in an automatic transmission rebuild costs the job twice: once for the part and again for the teardown.CFT30 belt pulley (1.35 wide) (75 pins). This replacement...

For JF011E automatic transmissions. Using the wrong component in an automatic transmission rebuild costs the job twice: once for the part and again for the teardown.CVT pump flow control valve...

Using the wrong component in an automatic transmission rebuild costs the job twice: once for the part and again for the teardown.4R44E Miscellaneous Components. This replacement part is cataloged to...

For TH200 automatic transmissions. Using the wrong component in an automatic transmission rebuild costs the job twice: once for the part and again for the teardown.4L60E 200c 700 park pawl...

For A4LD automatic transmissions. A sprag either holds or it does not, and when it lets go the symptom arrives all at once.4R55E sprag rear (4.0l) (26 lugs) (plastic cage...

Rings wear in proportion to shaft runout, so they are always a symptom as well as a part.E4OD press reg boost o-ring style w o-rings) valve assy. This ring set...

Heat is what ends the service life of an automatic transmission, and the cooler is the only part that fights it.4L80E Rear Cooler Line (Push-In Type) UpFitting. This adds the...

Once a bushing loses its crush, the shaft it supports starts cutting its own seat.V.W 096 097 01M forward hub to 3-4 drum (plastic insert) (.650 tall) bushing. The set...

The parts that wear in an automatic transmission wear together, so replacing them together is what makes the repair last.JF011E pulley bearing kit. This kit brings together the parts a...

Sourcing a rebuild one part at a time means the job sits on the bench while the last piece ships.JF010E pulley bearing kit. This kit covers the components a teardown...

Getting the right piece the first time is what keeps a rebuild on schedule.A606 chain (late dual type) 31 links (.775. It meets the dimensions the assembly was built around.A...

For AX4S automatic transmissions. Using the wrong component in an automatic transmission rebuild costs the job twice: once for the part and again for the teardown.AX4N chain (3 4wide) multi-flex...

Reused steels are the most common reason a rebuild comes back on the hook within the first thousand miles.6T70 clutch (.045)(5t 1-alignment tab) (waved) (7-1 4 id) steel. This steel...

Using the wrong component in an automatic transmission rebuild costs the job twice: once for the part and again for the teardown.BCLA in bell hsg under 238 brg (alum) 11...

Off center rotation wears sealing rings at an angle, and angled rings never seal again.4T60E TH440-t4 (presses in channel plate) sleeve. The set covers the wear positions a teardown exposes.Correct...

Steels that have been through a failure carry hot spots you cannot see, and those hot spots are where the next slip starts.6L80E reverse clutch (.054) (12 teeth) (6 3...

The steels carry the clamping load of the entire pack, so once they lose thickness the pressure never reaches the friction surface evenly.6F35 Steel Waved 3-5 Reverse Clutch (.035)(24 Internal...

For AXOD automatic transmissions. Getting the right piece the first time is what keeps a rebuild on schedule.AX4N pump 2003 rotor. The piece is produced to the dimensions the position...

For AXOD automatic transmissions. The cost of a wrong part is never the part; it is the second teardown.AX4N pump vane. This is the correct piece for the unit code...

Getting the right piece the first time is what keeps a rebuild on schedule.TH125 pump rotor (metal) ring. It is cataloged against the unit code rather than the vehicle.Internal specifications...

Parts within one transmission family are often dimensionally different by build date.A604 (in case under pump) - valve. The piece is produced to the dimensions the position requires.Fit and finish...

Sprag failure usually takes the elements it rides against with it.A500 Sprag A518 A618 Overrun Clutch (Overdrive). Cage and elements are matched as a set.The assembly is matched to the...

A teardown that finds one worn component has almost always found the first of several.A904 spring roller kit (10-spring roller) 87. This kit replaces the wear items together, which is...

Dirty fluid takes out solenoids first because the internal tolerances are the tightest in the unit.A404 A727 518 618 3-Prong (Short 2-114) Screw-In (Push-On Conn) 97Neutral Switch. The unit meets...

Using the wrong component in an automatic transmission rebuild costs the job twice: once for the part and again for the teardown.A413 forward clutch return (4.950 od) spring. It is...

Automatic transmission components are unit specific, and the differences are rarely visible side by side.E4OD overdrive clutch diaphra spring. It meets the dimensions the assembly was built around.Dimensions are matched...

The cost of a wrong part is never the part; it is the second teardown.FMX C1AP-7B070-A - Miscellaneous Components. This is the correct piece for the unit code on the...

Getting the right piece the first time is what keeps a rebuild on schedule.FMX 81 pump gears. This restores the component to its stock specification.The position inside the unit determines...

Getting the right piece the first time is what keeps a rebuild on schedule.C4 C4 C5 forward clutch return spring. The part is matched to the position it serves inside...

The sprag carries full engine torque in the gear it holds, with no second chance.4T80E sprag intermedia 2da 1993. This sprag assembly restores the one way holding function of the...

For TH700-R4 automatic transmissions. Internal specifications change mid production, which is why the unit code matters more than the model year.4L60E (front seal lock) (metal) retainer. This replacement part is...

Steels that have been through a failure carry hot spots you cannot see, and those hot spots are where the next slip starts.4L60E TH700 200-4r pump vane (steel) 90 ring....