Smart Products Filter Index - Do not delete

The outer shell of a seal rusts in its bore and walks out under pressure long before the lip fails.TH125 axle (both sides) metal clad seals. This returns the sealing...

Seals at the shaft are the last line between the fluid and the driveway.TH125 th 125 front (converter hub) metal clad seals. This restores the seal between the unit and...

Seals at the shaft are the last line between the fluid and the driveway.POWERGLIDE POWERGLIDE ALUMINUM aluminum rear (w flangew out boot) 73 metal clad seals. The lip is formed...

A seal that has hardened on the lip leaks under pressure and looks serviceable on the bench.ATX front metal clad seals. The lip is formed to the shaft diameter it...

For A4LD automatic transmissions. A leaking metal clad seal shows up as fluid on the case and, left alone, as a low level that starves the pump.4R44E c-3 rear (without...

Leaks at the axle and output shafts are the ones customers see, and the ones that bring the vehicle back.A540 left axle (exc awd) metal clad seals. The seal is...

For LN371B automatic transmissions. A leaking metal clad seal shows up as fluid on the case and, left alone, as a low level that starves the pump.4F27E LN471B 71b extencion...

For LN371B automatic transmissions. A leaking metal clad seal shows up as fluid on the case and, left alone, as a low level that starves the pump.4F27E LN471B 71b aftermarket...

Fluid loss at a shaft seal is slow enough that the unit is damaged before anyone notices the level.RL3F01A RN3F01A axle (both sides) metal clad seals. This restores the seal...

A shaft seal riding in a grooved surface never seals again, whatever its condition.RL3F01A RN3F01A front metal clad seals. The lip is formed to the shaft diameter it wipes.A seal...

Leaks at the axle and output shafts are the ones customers see, and the ones that bring the vehicle back.L4N71B L3N71B front. metal clad seals. This seal restores containment at...

A plugged pickup aerates the fluid, and aerated fluid cannot hold pressure anywhere in the circuit.CD4E Automatic Transmission Filter to valve body (exhaust regulator) seal. This Automatic Transmission Filter restores...

Old sealing material gets brittle in storage as well as in service, which is why age matters as much as mileage.5R110W pump o-ring. This set covers the gaskets, seals and...

Fluid on the case is the visible half of the problem; the other half is the pressure that never reached the clutch.A4CF1 F4A51 W4A42 W4A51 W5A51 F4A4B W4A4B a5gf1 A5HF1...

A rebuild with reused seals is a rebuild that comes apart again.TH700-R4 inner servo piston (donut)(red or green) o-ring. This set returns every sealing point a teardown opens to a...

External leaks and lost line pressure both trace back to gaskets and seals that hardened with age and heat.4T60E lower channel plate gasket. This set restores the containment the hydraulic...

External leaks and lost line pressure both trace back to gaskets and seals that hardened with age and heat.68RFE bonded valve body plate. The gaskets and seals are produced to...

A single hardened o-ring can bleed off the pressure an entire clutch circuit needs.62TE u d direct drum (w tabs) peek ring. This set returns every sealing point a teardown...

A single hardened o-ring can bleed off the pressure an entire clutch circuit needs.L4N71B L3N71B front pump overdrive case o-ring. This is the sealing set a rebuild replaces from end...

For 087 automatic transmissions. Seals do not usually tear; they take a set, and a set seal leaks at exactly the pressure the circuit needs most.This set returns every sealing...

For A4LD automatic transmissions. Old sealing material gets brittle in storage as well as in service, which is why age matters as much as mileage.4R44E c-3 pump o-ring. This is...

Rubber that has cycled through enough heat stops returning to its shape, and a seal that does not return does not seal.5R55N w s pump cover o-ring. The kit covers...

A rebuild with reused seals is a rebuild that comes apart again.TH200 th 200 200c pump 87 o-ring. The gaskets and seals are produced to the stock sealing dimensions.Internal seals...

External leaks and lost line pressure both trace back to gaskets and seals that hardened with age and heat.ATX pump o-ring. This is the sealing set a rebuild replaces from...

Fluid on the case is the visible half of the problem; the other half is the pressure that never reached the clutch.A404 pump o-ring. This set covers the gaskets, seals...

Fluid on the case is the visible half of the problem; the other half is the pressure that never reached the clutch.FIOD e 4R70 4R75 Pump o-Ring. The rubber is...

For TH400 automatic transmissions. Old sealing material gets brittle in storage as well as in service, which is why age matters as much as mileage.4L80E th 400 pump body (viton)...

For A904 automatic transmissions. Seals do not usually tear; they take a set, and a set seal leaks at exactly the pressure the circuit needs most.A500 speed-o housing (red) o-ring....

A rebuild with reused seals is a rebuild that comes apart again.RL4F03A front pump o-ring. This set restores the containment the hydraulic circuits were designed with.Seal material is matched to...

A single hardened o-ring can bleed off the pressure an entire clutch circuit needs.W4A32 km 170 series F4A33 W4A32 33 pump o-ring. Each seal is formed to the groove and...

For TH700R4 automatic transmissions. Old sealing material gets brittle in storage as well as in service, which is why age matters as much as mileage.4L60E filler tube o-ring. This set...

The pan gasket is what everyone sees, but the internal seals are what decide whether the unit holds pressure.F4A42 fa41 F4A41 F4A42 f5a42 a5gf1 pump gasket. This set returns every...

A single hardened o-ring can bleed off the pressure an entire clutch circuit needs.V.W 096 097 01M gasket gasket Differential cascaron -095. This is the sealing set a rebuild replaces...

Fluid on the case is the visible half of the problem; the other half is the pressure that never reached the clutch.ATX valve body (lower) gasket. The gaskets and seals...

External leaks and lost line pressure both trace back to gaskets and seals that hardened with age and heat.ATX valve body (upper) gasket. The rubber is rated for the fluid...

Rubber that has cycled through enough heat stops returning to its shape, and a seal that does not return does not seal.TH700-R4 valve body (lower) gasket. This set returns every...

The pan gasket is what everyone sees, but the internal seals are what decide whether the unit holds pressure.TH700-R4 Valve Body (Upper) Gasket. The gaskets and seals are produced to...

The pan gasket is what everyone sees, but the internal seals are what decide whether the unit holds pressure.A604 Solenoid Pack (Takes 2) 98 Gasket. This is the sealing set...

The steels carry the clamping load of the entire pack, so once they lose thickness the pressure never reaches the friction surface evenly.4T60E th 440-t4 side pan (inner) stamped steel...

Fluid on the case is the visible half of the problem; the other half is the pressure that never reached the clutch.A604 solenoid pack (takes 2) 98 gasket. This set...

A rebuild with reused seals is a rebuild that comes apart again.ATX differential retainer gasket. This set restores the containment the hydraulic circuits were designed with.Sealing sets are replaced complete...

Seals do not usually tear; they take a set, and a set seal leaks at exactly the pressure the circuit needs most.ATX pump gasket. This is the sealing set a...

Rubber that has cycled through enough heat stops returning to its shape, and a seal that does not return does not seal.TH250 250C 350 350C Pump 86 Gasket Pump Cover...

External leaks and lost line pressure both trace back to gaskets and seals that hardened with age and heat.A404 Front Pump Gasket. This set covers the gaskets, seals and o-rings...

Rubber that has cycled through enough heat stops returning to its shape, and a seal that does not return does not seal.C6 C6 pump 87 gasket. This set covers the...

Rubber that has cycled through enough heat stops returning to its shape, and a seal that does not return does not seal.4F50N case cover to case (silicone beaded) gasket. The...

External leaks and lost line pressure both trace back to gaskets and seals that hardened with age and heat.4T65E 4T65E Side Pan (Outer) Molded RubberSteel UpGasket. The kit covers the...

Rubber that has cycled through enough heat stops returning to its shape, and a seal that does not return does not seal.BMXA main case 05 gasket. The rubber is rated...

Seals do not usually tear; they take a set, and a set seal leaks at exactly the pressure the circuit needs most.RL3F01A RN3F01A converter housing to case gasket. This set...

Fluid on the case is the visible half of the problem; the other half is the pressure that never reached the clutch.4T40E Bottom pan Bonded Rubber pan Gasket. The gaskets...