Smart Products Filter Index - Do not delete

A leaking metal clad seal shows up as fluid on the case and, left alone, as a low level that starves the pump.CFT30 axle(bell housing side) 2wd metal clad seal....

A shaft seal riding in a grooved surface never seals again, whatever its condition.CFT30 enger side metal clad seal. This restores the seal between the unit and everything outside it.Lip...

Leaks at the axle and output shafts are the ones customers see, and the ones that bring the vehicle back.AW55-50SN AW55-50 axle enger side 2wd metal clad seal. This restores...

A shaft seal riding in a grooved surface never seals again, whatever its condition.TF80SC TF80 81 axle enger side metal clad seal. The seal is produced to the bore and...

A seal that has hardened on the lip leaks under pressure and looks serviceable on the bench.A604 front thinner seal some metal clad seal. The seal is produced to the...

A leaking metal clad seal shows up as fluid on the case and, left alone, as a low level that starves the pump.VT25-E output (axle) bell hsg side case side...

A leaking metal clad seal shows up as fluid on the case and, left alone, as a low level that starves the pump.A604 axle (both sides) metal clad seal. This...

A shaft seal riding in a grooved surface never seals again, whatever its condition.RE0F09A axle (bell housing side)(metal clad seal. The outer shell is sized to the bore so it...

Leaks at the axle and output shafts are the ones customers see, and the ones that bring the vehicle back.BDHA front seal metal clad seal. Shell and lip are both...

Fluid loss at a shaft seal is slow enough that the unit is damaged before anyone notices the level.RL4R01A adapter housing 4wd (all except) metal clad seal. Shell and lip...

Seals at the shaft are the last line between the fluid and the driveway.CVT mfhs mwwa axle enger side CVT metal clad seal. Shell and lip are both sized to...

A leaking metal clad seal shows up as fluid on the case and, left alone, as a low level that starves the pump.JF613E front seal metal clad seal. This replacement...

Replacing a shaft seal costs minutes on the bench and hours once the unit is in the vehicle.AW55-50SN AW55-50 51SN axle bell hsg side (2wd) metal clad seal. This returns...

Leaks at the axle and output shafts are the ones customers see, and the ones that bring the vehicle back.4R44E c-3 A4LD 4R44E 4R55E front (w flange) Metal Clad Seal...

The outer shell of a seal rusts in its bore and walks out under pressure long before the lip fails.TF80-SC TF81 axel driver side milan zephyr m metal clad seal....

Replacing a shaft seal costs minutes on the bench and hours once the unit is in the vehicle.AS69RC pump metal clad seal. This seal restores containment at the shaft it...

For AXOD automatic transmissions. A leaking metal clad seal shows up as fluid on the case and, left alone, as a low level that starves the pump.AX4N front aftermarket metal...

Replacing a shaft seal costs minutes on the bench and hours once the unit is in the vehicle.RE0F09A axle (case side w transfer) (.535thick)(2.330od)(1.505 id) u metal clad seal. The...

Fluid loss at a shaft seal is slow enough that the unit is damaged before anyone notices the level.RE0F09A front (pump) (.315hick)(2.530od)(1.905 id) metal clad seal. This returns the sealing...

Fluid loss at a shaft seal is slow enough that the unit is damaged before anyone notices the level.6L45 8L45E extension housing metal clad seal. This seal restores containment at...

Fluid loss at a shaft seal is slow enough that the unit is damaged before anyone notices the level.8L45 8L45E front cover metal clad seal. This seal restores containment at...

For A904 automatic transmissions. Replacing a shaft seal costs minutes on the bench and hours once the unit is in the vehicle.A500 front (without flange) aftermarket metal clad seal. This...

Seals at the shaft are the last line between the fluid and the driveway.TH400 front aftermarket metal clad seal. This returns the sealing point to its stock containment.A grooved shaft...

For A4LD automatic transmissions. Seals at the shaft are the last line between the fluid and the driveway.4R44E c-3 front (w flange) (vitondeep lip) black aftermarket metal clad seal. This...

A leaking metal clad seal shows up as fluid on the case and, left alone, as a low level that starves the pump.RE4F03A v RE4F03B axle booth sides metal clad...

Replacing a shaft seal costs minutes on the bench and hours once the unit is in the vehicle.BZKA left driver side metal clad seal. The outer shell is sized to...

Replacing a shaft seal costs minutes on the bench and hours once the unit is in the vehicle.BDHA left driver side metal clad seal. This returns the sealing point to...

For BAXA automatic transmissions. A leaking metal clad seal shows up as fluid on the case and, left alone, as a low level that starves the pump.B6VA converter housing metal...

A shaft seal riding in a grooved surface never seals again, whatever its condition.A404 (both axles) w floating lip metal clad seals. The seal is produced to the bore and...

Fluid on the case is the visible half of the problem; the other half is the pressure that never reached the clutch.62TE pump pump o-ring. This set covers the gaskets,...

Fluid on the case is the visible half of the problem; the other half is the pressure that never reached the clutch.45RFE front plate cover (outer) o-ring. This set returns...

A rebuild with reused seals is a rebuild that comes apart again.FN4A-EL valve body gasket. Each seal is formed to the groove and bore it serves.The sealing surfaces have to...

The pan gasket is what everyone sees, but the internal seals are what decide whether the unit holds pressure.68RFE bonded valve body plate. The rubber is rated for the fluid...

The pan gasket is what everyone sees, but the internal seals are what decide whether the unit holds pressure.4L30E center support to plate (takes 2) gasket. This set restores the...

Rubber that has cycled through enough heat stops returning to its shape, and a seal that does not return does not seal.6L80E fill tube seal. This set restores the containment...

Cold weather makes a marginal Automatic Transmission Filter fail first, because thick fluid cannot pull through loaded media.FIOD Automatic Transmission Filter to case 93 boot. This Automatic Transmission Filter returns...

For 095 automatic transmissions. Fluid on the case is the visible half of the problem; the other half is the pressure that never reached the clutch.V.W 096 097 01M pump...

Old sealing material gets brittle in storage as well as in service, which is why age matters as much as mileage.DPO pump late cut seal. This set returns every sealing...

A rebuild with reused seals is a rebuild that comes apart again.R4 R4 V4 V5A51 r5 pump body o-ring. This set returns every sealing point a teardown opens to a...

For 010 automatic transmissions. The pan gasket is what everyone sees, but the internal seals are what decide whether the unit holds pressure.Each seal is formed to the groove and...

Fluid on the case is the visible half of the problem; the other half is the pressure that never reached the clutch.V.W 096 097 01M 095 096 097 098 pump...

Old sealing material gets brittle in storage as well as in service, which is why age matters as much as mileage.V.W 096 097 01M pump gasket gasket pump -095. This...

The pan gasket is what everyone sees, but the internal seals are what decide whether the unit holds pressure.4F27E L3N71B front pump (non lock-up) gasket. This set returns every sealing...

A single hardened o-ring can bleed off the pressure an entire clutch circuit needs.45RFE solenoid block gasket kit. This is the sealing set a rebuild replaces from end to end.Internal...

A rebuild fails twice as often when new parts go back in against components that were left in place to save money.RE4F03A kit valve body gasket. The contents are matched...

Once a pack burns, the debris reaches every circuit in the unit, which is why single part repairs rarely hold.RE4F02A kit valve body gasket. This kit puts the whole wear...

A teardown that finds one worn component has almost always found the first of several.RL4F02A kit valve body gasket. The kit covers the wear items a rebuild of this unit...

A teardown that finds one worn component has almost always found the first of several.RL4F03A kit valve body gasket. This kit puts the whole wear set on the bench at...

For F4EAT automatic transmissions. Sourcing a rebuild one part at a time means the job sits on the bench while the last piece ships.4EAT kit valve body gasket. This kit...

Old sealing material gets brittle in storage as well as in service, which is why age matters as much as mileage.42RLE solenoid block gasket kit. This is the sealing set...