TF80SC / TF-81SC(AF21)

Old sealing material gets brittle in storage as well as in service, which is why age matters as much as mileage.TF-81SC bottom pan duraprene side pan (12 bolt holes) pan...

When the pump bushing on a TF80-SC or TF-81SC wears out, oil film breaks down fast and bore damage follows, so getting the right replacement bushing with the correct geometry...

When the Automatic Transmission Filter on a TF80 automatic transmission is due for replacement, getting the right part number is the whole job. This listing covers one Automatic Transmission Filter,...

This TF80SC / TF81 banner rebuild kit pairs a complete overhaul gasket and seal set with a full friction clutch pack, so the soft parts and frictions for the job...

Replacing a shaft seal costs minutes on the bench and hours once the unit is in the vehicle.AW80-40LE TF80 81 axle driver side five hundred metal clad seal. This replacement...

When the B1 band in a TF80 or TF-81SC automatic transmission is worn or damaged, this rigid split brake band is the direct replacement to address the position. What sets...

Heat damage starts at the friction surface and works outward, which is why it is invisible until the unit slips.TF80SC 2 15.L 11-14 3 (4 TOMAS) 15- Cooler. The core...

TF81 Banner Rebuild Kit for TF-80SC, TF80-SC, TF80-SD and TF81-SC automatic transmissions, 2005 and later. Includes frictions and gasket and seal set for a complete overhaul. 2 pieces in 2...

Leaks at the axle and output shafts are the ones customers see, and the ones that bring the vehicle back.TF80-SC tf-80 81 front metal clad seal. The outer shell is...

A piston that leaks past its seal applies the pack slowly, and slow apply is what burns friction material.AF40 TF80(AF40) TF81(AF21) bonded piston kit bonded pistons (combo). This piston set...

Hairline cracks in a piston do not show until the circuit is under pressure on the road.AF40 TF80(AF40) TF81(AF21) bonded piston kit (combo). This set returns the apply circuit to...

Replacing a single worn friction plate in a TF80 or AF40 unit does not require buying a full kit, and this listing gives you exactly that one component without extras...

A shaft seal riding in a grooved surface never seals again, whatever its condition.TF80SC TF80 81 axle enger side metal clad seal. The seal is produced to the bore and...

The outer shell of a seal rusts in its bore and walks out under pressure long before the lip fails.TF80-SC TF81 axel driver side milan zephyr m metal clad seal....

TF81 Overhaul Kit for TF-80SC, TF80-SC and TF80-SD automatic transmissions, 2006 and later. Includes gasket and seal set for a complete overhaul. 1 pieces in 1 components. TF81 automatic transmission:...

Debris in the valve body holds a valve open just long enough to burn the pack it feeds.TF80-SC tf-80 shift kit. The bores and the separator plate are matched to...

When a TF80-SC automatic transmission rebuild stalls because a shop is waiting on multiple vendors for the friction pack, the Automatic Transmission Filter, and the gasket set separately, this kit...

When the controller commands a shift and nothing happens, the circuit is usually the culprit, not the clutch.TF81SC AF21 solenoid set remanufactured. It is built to the resistance and flow...

When rebuilding a TF80 automatic transmission, having the correct thrust washers on hand keeps the job moving without last-minute delays. This listing covers the TF80-SC washer kit, a single assembled...