TF80SC [05-UP] Automatic Transmission Friction Clutch Pack (AF40)

Replacing a single worn friction plate in a TF80 or AF40 unit does not require buying a full kit, and this listing gives you exactly that one component without extras you may not need. The plate covers TF80SC-coded automatic transmission units from 2005 up, so confirming that code on your unit before ordering is the first step.

Friction plates in these transmissions absorb heat and pressure at every shift event. When the surface material glazes or burns through, clutch pack engagement becomes inconsistent, the unit slips under load, and shift feel degrades until the damaged plate is replaced. Swapping out the friction plate is the direct mechanical answer to that condition.

This is a single-piece listing. The listing does not include friction steels, seals, o-rings, Automatic Transmission Filters, bands, or any other component from the clutch pack or the surrounding hydraulic circuit. If your repair calls for a broader set of parts, check what else your application requires before placing this order.

The plate weighs 2.6 lb and is listed under catalog model TF80SC, compatible with transmissions identified as TF80 or AF40. Application begins at model year 2005 and continues through current production. Transmission codes can differ even within the same vehicle platform, so cross-reference the code stamped or tagged on the unit itself rather than relying on year or engine alone. If the code on your unit does not read TF80 or AF40, this plate is not the right part for that application.

• Slipping clutch packs and burnt friction material are the root cause of most engagement failures in these units, and replacing the worn plate is where that repair begins.
• This listing covers one friction plate only. It does not include steels, seals, Automatic Transmission Filters, bands, or any other clutch pack components. Verify your full parts list before ordering.
• Friction plates in these units take direct heat and pressure with every shift cycle. This plate is sized and surfaced to match the OE specifications of the TF80SC clutch pack stack.
• One friction clutch plate, 2.6 lb. Applies to TF80 and AF40 automatic transmission units coded TF80SC, model year 2005 and up.
• Before ordering, confirm the exact transmission code on the unit itself, the model year, and the specific clutch pack position you are replacing. Not all TF80 variants share the same stack.

What's in the box

• 1 x Friction Clutch Pack, TF80SC Automatic

Compatible vehicles

• Fits Brera [05-09], 159 [06-10], Giulia [12-13], Spider [06-10], Regal [11-17], SRX [10-12], C4, C5, C6, C8 [10-12], DS4 [11-12], X-Type [10], Delta [10-12], Phedra [10-12], Thesis [10-12].