4T60 / 440-T4

For 4T60E automatic transmissions. When the reverse band in a 4T60, 4T65, or 4T65E unit is worn through, no amount of adjustment recovers proper line hold, and replacing it with...

4T60E 4T65E Complete Transmission Rebuild Kit [1991-UP]automatic transmission kit for service and rebuild applications.What's Included:- 4t60e 4t65e band rigid forward (rear) 1991-up (relined) (CBD-003833)Vehicle Compatibility:- Allure [05-10] 3.0, 3.6, 3.8,...

When the only part standing between you and a finished rebuild is the 2-1 coast band, this listing gives you exactly that piece without requiring you to buy a full...

When the bushing at the extension housing or t4 case position wears out on a 4T60E or 4T65E automatic transmission, the result is shaft play that leads to seal leaks,...

For 4T60E automatic transmissions. Rebuilding the reverse circuit on a 4T60, TH440 or 4T65E automatic transmission calls for a band that holds its geometry under servo pressure, and this relined...

When the Automatic Transmission Filter in a 4T60E or 4T65E transmission is restricted or damaged, fluid delivery to the valve body suffers, and shift feel follows. This listing covers a...

A single hardened o-ring can bleed off the pressure an entire clutch circuit needs.4T60E aluminum pan side pan (outer) molded rubber gasket. This is the sealing set a rebuild replaces...

The Automatic Transmission Filter is the lowest cost part in the unit and the one that costs the most when it is skipped.4T60 E TH440 4t65e on Automatic Transmission Filter...

Lip seals take a set in the groove and stop wiping the bore the way they did when new.4T60E 3rd clutch (bonded)(no check ball) piston. The seals are bonded to...

th 440-t4 band rigid 1-2 (rear) 1983-up (relined)nan [1983-UP]transmission band designed to support proper engagement and braking function within the transmission.What's Included:- Th 440-t4 band rigid 1-2 (rear) 1983-up (relined)nan...

Seals do not usually tear; they take a set, and a set seal leaks at exactly the pressure the circuit needs most.4T60E 440-t4 upper channel plate (one piece design) l1985-up...

Getting the right piece the first time is what keeps a rebuild on schedule.4T60E 440-t4 oil pump drive (9 3 4 long) pump shaft. This restores the component to its...

A shift that arrives late is an electrical symptom until the circuit is ruled out.4T60E solenoid epc tcc pwm. This electrical component restores the control function the valve body depends...

An electrical fault in the shift circuit shows up as a stored code, a harsh shift or a gear the unit will not select.4T60 4T60E4T65E Neutral Safety No Wire Harn...

4T60E Overhaul Kit for 4T60 and TH440 automatic transmissions, 1991 and later. Includes gasket and seal set for a complete overhaul. 1 pieces in 1 components. Overhaul Kit for 4T60E...

Getting the B-1-2 location right on a 4T60 or TH440 rebuild starts with having the correct bushings and washer for that specific position in the automatic transmission. This set is...

A shift that arrives late is an electrical symptom until the circuit is ruled out.4T60 440-t4 solenoid tcc lock-up. Response time and resistance match the stock, which keeps the shift...

Debris in the valve body holds a valve open just long enough to burn the pack it feeds.4T60E 440-t4 4th clutch hub 1983--up bearing. This returns the hydraulic side of...

Using the wrong component in an automatic transmission rebuild costs the job twice: once for the part and again for the teardown.4T60E (hv-036) chain. This is the correct piece for...

Dirty fluid takes out solenoids first because the internal tolerances are the tightest in the unit.4T60E solenoid tcc pwm 91-99. It is built to the resistance and flow the controller...

External leaks and lost line pressure both trace back to gaskets and seals that hardened with age and heat.4T60E lower channel plate gasket. This set restores the containment the hydraulic...

Bonded pistons fail at the bond line, and the failure is invisible on the bench.4T60E rd clutch (bonded)(w check ball) piston. This set returns the apply circuit to full clamping...

The piston is what converts line pressure into clamping force, so a leaking one makes every other repair pointless.4T60E piston 2nd. This piston set restores a positive seal so the...

Replacing a shaft seal costs minutes on the bench and hours once the unit is in the vehicle.4T60E th440-t4 linkage shaft metal clad seal. The lip is formed to the...

Rubber that has cycled through enough heat stops returning to its shape, and a seal that does not return does not seal.4T60 th 440-t4 bottom pan duraprene pan gasket. This...

Old sealing material gets brittle in storage as well as in service, which is why age matters as much as mileage.4T60 440-t4 bottom pan duraprene pan gasket. The rubber is...

Off center rotation wears sealing rings at an angle, and angled rings never seal again.4T60E th440-t4 (presses in channel plate) sleeve. The set covers the wear positions a teardown exposes.Correct...

Automatic transmission components are unit specific, and the differences are rarely visible side by side.4T60 th440-t4 (w round pins) 7 8wide all exc allante 93 chain. This part matches the...

A part that is close but not correct fits on the bench and fails in the vehicle.4T60 440-t4 (w round pins) 7 8 wideall exc Allant.e 93) chain. It is...

Using the wrong component in an automatic transmission rebuild costs the job twice: once for the part and again for the teardown.4T60E 7 8 replaces all chain. This replacement part...

Using the wrong component in an automatic transmission rebuild costs the job twice: once for the part and again for the teardown.4T60E 440-t4 4th clutch hub 1983--up bearing. This replacement...

An electrical fault in the shift circuit shows up as a stored code, a harsh shift or a gear the unit will not select.4T60E neutral safety w wire harness (1-4...

A slow solenoid response puts the shift overlap out of range and burns the pack that was fine last week.4T60E tcc solenoid. This replacement returns the circuit to the response...

When a transmission is already on the bench, a missing or worn washer can stall the whole job. This washer kit is stocked for the 4T65E, TH440, and 4T60E automatic...

When fluid circulation is restricted by a worn or saturated Automatic Transmission Filter, the entire automatic transmission suffers: pressure drops, the valve body reacts inconsistently, and internal components wear faster...

modulator 440-t4 4t60e 4t65e red stripe (dual-line) (universautomatic transmission component designed to support proper operation, fit, and durability when installed according to specification.What's Included:- Modulator 440-t4 4t60e 4t65e red stripe...

4T60E 4T60E FRICTION CLUTCH PACKfriction components designed to provide reliable clutch engagement and consistent operation under normal transmission service conditions.WHAT'S IN THE BOX:- 4T60E FRICTION CLUTCH PACKVehicle Compatibility:- Century [97-99]...

When a clutch pack starts slipping, the steels are often the first parts to show heat damage even when the frictions still look serviceable.4T60E Steel Clutch Pack. These steel plates...

Automatic transmission components are unit specific, and the differences are rarely visible side by side.4T60E pump rotor 17.99mm slide. It is cataloged against the unit code rather than the vehicle.Internal...

A slow solenoid response puts the shift overlap out of range and burns the pack that was fine last week.4T60E Output Speed Sensor. This replacement returns the circuit to the...

When the B-1-2 circuit in a 4T60 or TH440 unit shows wear at the bushing and washer position, replacing those pieces as a matched set is a straightforward way to...

The steels carry the clamping load of the entire pack, so once they lose thickness the pressure never reaches the friction surface evenly.4T60E th 440-t4 side pan (inner) stamped steel...