Smart Products Filter Index - Do not delete

Heat distorts a steel plate long before it discolors, which is why a pack that looks reusable often is not.4R70W steel pack. These steel plates are machined flat within specification...

U660E U661E Rebuild Kit for U660E automatic transmissions, 2006 to 2018. Includes frictions, gasket and seal set and Automatic Transmission Filter for a complete overhaul. 21 pieces in 5 components....

E4OD 4R100 Rebuild Kit for E4OD automatic transmissions, 1989 to 1995. Includes frictions, band, gasket and seal set, bushings and Automatic Transmission Filter for a complete overhaul. 26 pieces in...

CD4E Rebuild Kit for CD4E automatic transmissions, 2003 and later. Includes high energy frictions, band, gasket and seal set and Automatic Transmission Filter for a complete overhaul. 19 pieces in...

A750 A751 Rebuild Kit for A750 and A751 automatic transmissions, 2003 and later. Includes frictions, gasket and seal set, bushings and Automatic Transmission Filter for a complete overhaul. 4 pieces...

6R80 Rebuild Kit for 6R80 automatic transmissions, 2009 to 2014. Includes frictions, gasket and seal set and Automatic Transmission Filter for a complete overhaul. 3 pieces in 3 components. Sealing,...

4L60E Rebuild Kit for 4L60E, 4L65E and 4L70E automatic transmissions, 1993 to 1997. Includes frictions, steels, gasket and seal set and Automatic Transmission Filter for a complete overhaul. 5 pieces...

When an automatic transmission loses hydraulic pressure internally, sealing rings are one of the first components to inspect, and this FIOD sealing ring set is built to address exactly that...

When the extension housing bushing wears, output shaft movement increases and seal life drops sharply. This single bushing addresses that specific failure point in 2WD applications of the 6L80E and...

When a 4T65E comes apart and the B-1-2 bushing positions show wear, having the right bushings and washer ready keeps the rebuild moving without a second parts run. This set...

For FIOD automatic transmissions. When bushings wear in an FIOD automatic transmission, end play open up at the shaft and drum contact surfaces, and that play works against every other...

When rebuilding a JR403E automatic transmission, having the correct bushing and washer set on hand from the start keeps the job moving without waiting on back-ordered individual parts. This listing...

4L60E Master Rebuild Kit for 4L60E, 4L65E and 4L70E automatic transmissions, 1993 and later. Includes high energy frictions, steels, pistons, band, gasket and seal set, bushings and Automatic Transmission Filter...

FIOD Banner Rebuild Kit for FIOD automatic transmissions, 1980 to 1993. Includes frictions and gasket and seal set for a complete overhaul. 2 pieces in 2 components. This kit covers...

RL4R01A RE4R01A JR403E Banner Rebuild Kit for JR403E automatic transmissions, 1989 to 1998. Includes frictions and gasket and seal set for a complete overhaul. 2 pieces in 2 components. Combines...

5R55W 5R55S Banner Rebuild Kit for 5R55W, 5R55S and 5R55N automatic transmissions, 2002 and later. Includes frictions and gasket and seal set for a complete overhaul. 18 pieces in 5...

A cracked or hardened piston seal bleeds off apply pressure and the clutch it feeds slips under load.62TE 62TE PISTON KIT STK. This piston set restores a positive seal so...

When your clutch pack inspection on a 65RFE, 66RFE, or 68RFE shows a worn or glazed friction disc, this is the individual replacement you need to put that stack back...

An electrical fault in the shift circuit shows up as a stored code, a harsh shift or a gear the unit will not select.4L60E Vacuum Modulator Kit Replaces EPC Solenoid...

For JF009E automatic transmissions. Rebuilding a transmission with mismatched parts sourced one at a time costs time and leaves gaps in the job.CVT Transmission Pulley kit good condition. This kit...

A pack with a leaking piston never reaches full clamp, whatever the pressure gauge says.4L60E 4th Clutch (Bonded BLUE PISTONS PERFORMANCE) (Retros to 1982Piston. The sealing surface is produced to...

Hairline cracks in a piston do not show until the circuit is under pressure on the road.4L80E direct (bonded) piston. These pistons return the pack to the apply rate it...

Bonded pistons fail at the bond line, and the failure is invisible on the bench.4L80E 4L85E Forward Clutch (Bonded) UpPiston. This set returns the apply circuit to full clamping force.Cracks...

Bonded pistons fail at the bond line, and the failure is invisible on the bench.4L30E accumulator (bonded) cover Piston. This piston set restores a positive seal so the pack applies...

Old sealing material gets brittle in storage as well as in service, which is why age matters as much as mileage.5R110W 5R110W extension housing to case (paper metal) 2003-up gasket...

Old sealing material gets brittle in storage as well as in service, which is why age matters as much as mileage.E4OD Spacer Plate To Case (Upper) L97-UpGasket. The gaskets and...

The pan gasket is what everyone sees, but the internal seals are what decide whether the unit holds pressure.FIOD e 4R70 4R75 forward clutch (inner) lip seal. Each seal is...

Old sealing material gets brittle in storage as well as in service, which is why age matters as much as mileage.TH700-R4 detent cable boot Gasket. This set returns every sealing...

The pan gasket is what everyone sees, but the internal seals are what decide whether the unit holds pressure.FIOD valve body (upper) 93 gasket. The gaskets and seals are produced...

Rubber that has cycled through enough heat stops returning to its shape, and a seal that does not return does not seal.42RLE pump gasket. This set returns every sealing point...

For A904 automatic transmissions. Fluid on the case is the visible half of the problem; the other half is the pressure that never reached the clutch.A500 bottom pan cork pan...

Pressure that reads correct at the test port can still be lost inside the body.4L80E boost valve sleeve reverse (OE type). This returns the hydraulic side of the unit to...

Heat changes solenoid resistance, so a unit that shifts cold and misbehaves hot points straight at the electrical side.4R70W mlps neutral safety (12 pin digital) 10 crown vic grand marq...

A shift that arrives late is an electrical symptom until the circuit is ruled out.4L60E tcc w internal harn (internal mode des) solenoid. Response time and resistance match the stock,...

When the controller commands a shift and nothing happens, the circuit is usually the culprit, not the clutch.4L80E speed sensor input output. The unit meets the electrical specification the controller...

When the controller commands a shift and nothing happens, the circuit is usually the culprit, not the clutch.RE4R01A r03a (shift a b coast epc) l1988-up solenoid assy. This restores the...

A pack with a leaking piston never reaches full clamp, whatever the pressure gauge says.45RFE bonded piston kit (2-pistons). This piston set restores a positive seal so the pack applies...

Getting end play back within spec on a 5R110W rebuild depends on having the right thrust washers, and this set is assembled specifically for that unit. Unlike pre-packaged kits sourced...

When the pan comes off a 4L80E or 4L85E and you need a replacement Automatic Transmission Filter for the deep pan configuration, the geometry of the pickup neck matters as...

The external spin-on Automatic Transmission Filter for Allison 1000, 2000 and 2400 series automatic transmission units is a direct-replacement single piece designed for service intervals where the external circuit needs...

A worn front stator bushing in a TH700-R4 or 4L60E automatic transmission can bleed off line pressure exactly where the converter circuit needs it most, leading to slip, heat, and...

When the intermediate band in an E4OD or 4R100 automatic transmission is worn, glazed, or cracked, second-gear apply becomes inconsistent and slippage follows quickly. This is a single flex-style intermediate...

For 4T60E automatic transmissions. Rebuilding the reverse circuit on a 4T60, TH440 or 4T65E automatic transmission calls for a band that holds its geometry under servo pressure, and this relined...

When a single worn friction disc is all that stands between a clutch pack and proper engagement, replacing that one piece with the right material matters more than the quantity...

friction components designed to provide reliable clutch engagement and consistent operation under normal transmission service conditions.WHAT'S IN THE BOX:QTY PART NO. DESCRIPTION1. clutch pack module 4T40E 4T45E ht clutch pack...

A clutch pack holds torque only if the steels between the frictions are flat and parallel, and used plates rarely are.TH400 hi-performance steel module kolene. The plates are produced to...

A4LD Overhaul Kit for A4LD automatic transmissions, 1985 to 1994. Includes gasket and seal set for a complete overhaul. 1 pieces in 1 components. Overhaul Kit for A4LD - replacement...

For TH700-R4 automatic transmissions. Pressure that reads correct at the test port can still be lost inside the body.4L60E ball capsule 3rd accumulator (improve 2-3 shift feel) (in case under...

Internal specifications change mid production, which is why the unit code matters more than the model year.4L60E input shaft only new without drum 30-spline has reluctor. This part matches the...

Worn or cracked sealing rings inside a 4R70W, 4R75W or 4R70 automatic transmission allow fluid to bypass circuits that depend on sealed pressure, producing soft shifts, delayed engagement or pressure-related...